Actions

Global settings/nl: Difference between revisions

From LimeSurvey Manual

No edit summary
(Updating to match new version of source page)
Line 14: Line 14:
<center>[[File:Global Settings Tabs.png]]</center>
<center>[[File:Global Settings Tabs.png]]</center>


==Overzicht==
==Overview==
*'''Overzicht''': biedt je inzicht in de volgende algemene informatie van LimeSurvey.
*'''Overview''': provides the following general information about your LimeSurvey installation:
**'''Gebruikers''': Het aantal geregistreerde gebruikers met toegang
**'''Users''': shows the number of users that can access the LimeSurvey installation via the internal database authentication system
**'''Enquêtes''': 'Het totale aantal enquêtes (ongeacht de status);
**'''Surveys''': shows the total number of (active & inactive) surveys
**'''Actieve enquêtes''': Het aantal actieve enquêtes;
**'''Active surveys''': shows the total number of active surveys (that can be accessed by other users via the web)
**'''Inactieve resultaattabellen''': Als je een vraag tijdens na het actief maken wilt wijzigen, dan vervallen eigenlijk alle eerder ingezonden reacties op die enquête. Deze gegevens worden wel bewaard;
**'''Deactivated result tables''': at some point, you might want to change some questions during the survey runtime. If you do this, all the prior answers associated with the respective survey will be dissociated from the newly edited survey. The data that was previously collected will be stored in 'deactivated result tables'
**'''Actieve resultaattabellen''': Het aantal actieve enquêtes met toegangscodes;
**'''Active token tables''': shows the number of active token tables (that have a corresponding active survey)
**'''Inactieve toegangscodetabellen''': Het aantal gedeativeerde enquêtes met toegangcodes.
**'''Deactivated token tables''': shows the number of deactivated token tables


{{Note|Een toelichting over [https://manual.limesurvey.org/Survey_participants/nl#Inleiding tokens].}}
{{Note|Check our [https://manual.limesurvey.org/Survey_participants#Introduction short introduction on tokens] for further information.}}


*'''Updates''' {{ObsoleteIn/nl|2.06}}: Gebruik voor automatische updates de functie [[ComfortUpdate/nl|ComfortUpdate]]
*'''Updates'''{{ObsoleteIn|2.06}}: for automatic updates, please use the [[ComfortUpdate]] feature. In the later versions, it can be found under the Advanced tab that is located in the '''Configuration''' dialog from the main Limesurvey toolbar


{{Note|Er is ook een knop waarmee je de PHP informatie kunt bekijken, handig bij het oplossen van problemen in de installatie.}}
{{Note|Er is ook een knop waarmee je de PHP informatie kunt bekijken, handig bij het oplossen van problemen in de installatie.}}


==Algemeen==
==General==
*'''Naam website''': De naam van de enquêtesite. Deze naam wordt getoond in het overzicht van enquêtes en op het beheerpaneel.
*'''Site name''': is your survey site name. This name will appear in the survey list overview and in the administration header
*'''Standaardsjabloon''': Deze instelling bepaalt het sjabloon dat  standaard gebruikt worden voor de publieke lijst van enquêtes en voor nieuwe enquêtes of enquêtes zonder sjabloon. Je kunt ook een  eigen sjabloon gebruiken, lees [https://manual.limesurvey.org/Template_editor/nl sjabloonbeheer].
*'''Default template''': This setting specifies the default design template used for the 'public list' of surveys and for new surveys or surveys using a non-existing template. If you would like to use a personalized template, read about how you can use the LimeSurvey's [https://manual.limesurvey.org/The_template_editor template editor]
{{Note|De sjablonen worden opgeslagen in de map '/limesurvey/templates/'.}}  
{{Note|The templates are stored in '/limesurvey/templates/'.}}  
*'''Administratiesjabloon''': Deze instelling bepaalt de lay-out van het LimeSurvey beheerpaneel. Als je een eigen sjabloon gebruikt, zet het dan in de map '/limesurvey/upload/admintheme/'.
*'''Administration template''': This setting specifies the default design template used for the LimeSurvey administration. To use a customized template, add it in '/limesurvey/upload/admintheme/'
*'''Tijdsverschil (in uren)''': Stel het tijdsverschil in tussen het doelgebied van de enquête, en de plaats van de server. Stel dat je een enquête houdt in Nederland, maar de server staat in New York. dan is het tijdsverschil -6 uur. Stel hier dan '-6' in om de Nederlandse tijd op de antwoorden op enquêtes weer te geven.  
*'''Time difference (in hours)''': If your web server is in a different time zone to the location where your surveys will be based, put the difference between your server and your home time zone here. For example, I live in Australia, but I got a US web server. The web server is 14 hours behind my local time zone. So my setting here is "+14". In other words, it adds 14 hours to the time of the web server. This setting is particularly important when surveys timestamp the responses
*'''Tijdsduur sessie''':  (''alleen bij gebruik database sessies'') Bepaalt de levensduur van een sessie in PHP. De maximale waarde is 65000 seconden, dat wil zeggen dat de gebruiker 65000 seconden heeft om antwoord(en) naar de server te sturen. In de normale situatie worden sessies gebaseerd op bestanden, dan bepaald de beheerder de waarde van  "session.gc_maxlifetime", "session.save_path", enz. in de PHP configuratie. Als dit lokaal gezet wordt in de applicatie, dan kan het worden overschreven door de instelling van de webserver of andere applicaties bestandsgeoriënteerde sessies.  Zorg er ook voor dat de MySQL-instelling '''max_allowed_packet''' groot genoeg is , het kan bij een enquête best boven de 2 MB session-data komen. 
*'''Session lifetime (seconds)''' (''only available with database sessions''): Defines the time in seconds after which a survey session expires (provided there is no action from the participant). When using regular, file-based sessions, it is up to the system administrator to define the right values for 'session.gc_maxlifetime', 'session.save_path', etc., in the PHP configuration. Not only the web server settings but also the other similar settings of other applications may overwrite the setting for file-based sessions when editing it locally via the application. The maximum value that can be introduced is 65000 (seconds). It is recommendable to use a reasonable value. Bear in mind that, when using database sessions, check whether the MySQL setting called '''max_allowed_packet''' is set to a large value because some surveys generate over 2 MB of session data
*'''IP Informatie DB API Key''': Als je een sleutel hebt voor de [http://ipinfodb.com IP-Info-DB service], stel deze dan hier in. Zo kun je (de antwoorden van) deelnemers geotaggen. Om een sleutel te krijgen moet je je [http://ipinfodb.com/register.php registeren] voor de API.
*'''IP Info DB API Key''': Allows integration with the [https://ipinfodb.com IP-Info-DB service], which let's you determine the geographic location of survey takers based on their IP. To use a key, you need to [http://ipinfodb.com/register.php register] for the API
*'''Google Maps API Key''': Als je een sleutel hebt voor Google Maps, stel deze dan hier in.
*'''Google Maps API Key''': Allows for integration with Google Maps
*'''Google Analytics Tracking ID''': Als je een  Tracking ID hebt voor Google Analytics, stel deze dan hier in. Je kunt dit ook per enquête instellen. De sleutel kan in sjablonen gezet worden via de tag {GOOGLE_ANALYTICS_API_KEY}. Het omliggende JavaScript kan in het sjabloon gezet worden via {GOOGLE_ANALYTICS_JAVASCRIPT}.
*'''Google Analytics Tracking ID''': Allows for integration with Google Analytics. Surveys can override this site-level value. The tracking ID can be inserted into templates using {GOOGLE_ANALYTICS_API_KEY}. The full JavaScript that Google Analytics expects to find (including the key) can be included in templates via {GOOGLE_ANALYTICS_JAVASCRIPT}
<div class="simplebox">[[File:help.png]] '''TIP''': Google API
{{Note|For further details on how to use Google's API with LimeSurvey, check our [[Google API howto]] page.}}
# Registreer jezelf bij Google Analytics (GA): [http://www.google.com/analytics/ www.google.com/analytics/]
*'''Google Translate API Key''':  The Auto Translate feature uses version 2 of Google Translate's API. Google charges for this service. In order for the Auto Translate feature to work, get an API key from [https://code.google.com/apis/console/?api=translate this site], and then enter the key in this field
# Maak een  Tracking ID aan voor de site. Laat deze wijzen naar de URL tot 'index.php?'. De  Tracking ID wordt iets als UA-xxxxx. Laat GA alle pagina's monitoren, dat geeft je meer informatie.
*'''Character set for file import/export''': You can specify the character set most suiting you and your system, if you experience problems with the exporting/importing functions
# Ga naar de Instellingen, tab Algemeen.
*'''Side-menu behavior'''{{ObsoleteIn|3.0}}: How the side-menu should behave while editing surveys. The default value is 'Adaptive', meaning that the side-menu can be changed when and how the users want. The other values are 'Always open' and 'Always closed'
# Vul de sleutel in in het bovenstaande veld (Google Analytics API Key).  
*'''Default HTML editor mode:''' Sets the default mode for integrated HTML editor. The valid settings are:
# Pas optioneel het sjabloon aan als je een eigen versie gebruikt. Binnen de standaard sjablonen is de tag {GOOGLE_ANALYTICS_JAVASCRIPT} altijd aanwezig
** ''inline'' (default): Inline replacement of fields by an HTML editor. Slow, but convenient and user-friendly
# Activeer de enquête
** ''popup'' : Adds an icon that opens a popup window with the HTML editor. Faster, but the HTML code is displayed on the form
# Laat de enquête uitvoeren.
** ''HTML source'' : No HTML editor used, just the plain html source
# Ga naar de GA-site. Selecteer het goede account in de linkerbovenhoek (als je meerdere accounts hebt). Bekijk nu de statistieken van de enquête.</div>
*'''Question type selector''': Choose 'Full selector' to get a question type selector with preview and 'Simple' to get a plain select box
*'''Google Translate API Key''': De automatisch vertaaloptie gebruikt versie 2 van Google Translate. Google vraagt hier een financiële bijdrage voor.
*'''Template editor''': Choose 'Full template editor' to get an enhanced editor (with syntax-highlighting) when editing survey templates and 'Simple template editor' to get a plain editor field
Om er een sleutel voor te krijgen, log dan in op [https://code.google.com/apis/console/?api=translate deze site], en toets de URL van je site in. Bedenk dat deze functie bij elke vertaling kosten voor dit account oplevert.
*'''Karakterset bij importeren/exporteren''': als je problemen hebt met het invoer- of uitvoerbestand, specificeer de karakterset die het beste past bij je systeem
*'''Gedrag menu aan zijkant''': Hier kun je het gedrag tijdens het bijwerken van enquêtes van dit menu instellen.
*'''Standaard HTML editor methode''': stel de methode in van de geïntegreerde HTML editor. De mogelijke waarden zijn:
** ''inline'': De standaardwaarde.  Inline vervangen van een inputveld. Langzaam, maar gemakkelijk en gebruikersvriendelijk.
** ''popup'': Toont een icoon waarmee de HTML Editor geopend wordt in een popup. Sneller, maar de HTML-code wordt wel in de broncode getoond.
** ''HTML source'': Geen HTML-editor, wel html-code invoer mogelijk
*'''Vraagtype selecteren''': Kies hier voor 'Volledig selecteren' om een keuzemogelijkheid voor vragen met voorvertoning te gebruiken, of 'Beknopte keuzelijst' om alleen een selectiebox te gebruiken.
*'''Sjabloonbeheer''': Bepaal de editor die gebruikt wordt bij het wijzigen van sjablonen. Kies de 'Volledig sjabloon editor' om een uitgebreide editor te krijgen (met syntax-highlighting) , of 'Eenvoudige sjabloon editor' om alleen een tekstveld te gebruiken.


{{Alert|title=Attentie|text=Je zult merken dat enkele opties ontbreken op tabblad [[First_login_-_your_user_preferences/nl#De gebruikersvoorkeuren|'''Gebruikersvoorkeuren''']]. Als je de betreffende optie wijzigt bij de globale instellingen wordt de standaardoptie van de dropdownlijst overgenomen van de globale instelling. Voorbeeld: Als je een gebruiker bent met [[Manage users/nl#Gebruikersrechten voor een enquête instellen|instelling en plugin-rechten]], de HTML-editor naar de mode 'popup' aanpast, dan krijgen alle andere gebruikers die de standaardinstelling kiezen als mode voor de HTML-editor ook standaard de popup-optie.}}  
{{Alert|title=Attention|text=You will observe that some of the options can be found in your user's preferences, under [[First_login_-_your_user_preferences#Your_account_preferences#Your_personal_settings|Your personal settings tab]]. If you change the respective options from the global settings of your LimeSurvey installation, the 'default' option from the drop-down list of each option that is located under 'Your personal settings' tab will inherit the global settings values. For example, if you, as a user with [[Manage users#Set permissions for a single survey|Settings & Plugins permissions]], change the HTML editor mode to the 'popup' mode, all the other users that have chosen  the 'default value' option from the HTML editor mode in their personal settings will also use the popup option.}}


==E-mail instellingen==
==Email settings==
*'''Standaard e-mailadres website''': Dit is het standaard e-mailadres van de sitebeheerder, dat kan worden gebruiken voor systeemmededelingen en contactgegevens.
*'''Default site admin email''': This is the default email address of the site administrator and it is used for system messages and contact options
*'''Naam beheerder''': De (echte) naam van de sitebeheerder.
*'''Administrator name''': The real name of the site administrator
*'''E-mailmethode:''' Bepaalt op welke methode e-mails verzonden worden:
*'''Email method''': This determines how emails are being sent. The following options are available:
** '''PHP''': via de interne PHP  [https://php.net/manual/function.mail.php PHP mail functie]
**''PHP'' (default value): uses internal [https://php.net/manual/function.mail.php PHP mail function]
** '''Sendmail''': via sendmail
**''Sendmail'' : uses sendmail mailer
** '''SMTP''': via smtp-verwijzing. Gebruik deze optie als je LimeSurvey draait op een computer die niet je mailserver is.
**''SMTP'' : based on SMTP relaying. Use this setting when you are running LimeSurvey on a host that is not your mail server
***Controleer dat je email via SMTP loopt  (Instellingen -> E-mail instellingen bij de instellingen van de enquête) . Anders kun je de volgende foutmelding krijgen: SMTP -> ERROR: RCPT not accepted from server: 553 5.7.1 : Sender address rejected: not owned by user.
***Make sure that you are using your SMTP configured email (Global settings -> Email settings) if you use SMTP, otherwise there might be a chance that the following error is displayed: 'SMTP -> ERROR: RCPT not accepted from server: 553 5.7.1 : Sender address rejected: not owned by user'
**'''Qmail''': Kies deze optie als je Qmail-mailer gebruikt
**''Qmail'' : Set this if you are running the Qmail mailer
*'''SMTP-host''': Als je als e-mailmethode 'SMTP' gekozen hebt, vul hier dan de SMTP-server in. Geef de poort op als deze niet 25 is. Als je bijvoorbeeld Google-mail gebruikt, vul dan in
*'''SMTP host''': If you use 'SMTP' as email method, then you have to put your SMTP server here. If you are using a different port than port 25 (standard for SMTP), then you have to add the port number separated be a colon (example: 'smtp.gmail.com:465')
<syntaxhighlight lang="php" enclose="div"> $emailsmtphost = 'smtp.gmail.com:465';</syntaxhighlight>
*'''SMTP username''': If your SMTP-server needs authentication, set this to your user name, otherwise it must be blank
*'''SMTP-gebruikersnaam''': Vul hier de gebruikersnaam voor de SMTP-server in. Als de server geen toegangscontrole heeft, laat het dan leeg
*'''SMTP password''': If your SMTP-server needs authentication, set this to your password, otherwise it must be blank
*'''SMTP-wachtwoord:''' Vul hier het wachtwoord voor de SMTP-server in. Als de server geen toegangscontrole heeft, laat het dan leeg
*'''SMTP encryption''' - Three options are available:
*'''SMTP-encryptie''': Er zijn drie waarden.
**''Off'' (default value)
**''Off'' (standaardwaarde);
**''SSL''
**''SSL'';
**''TLS''
**''TLS''.
{{Note|Check the [https://en.wikipedia.org/wiki/Transport_Layer_Security following link] for further details about SSL/TLS.}}
{{Note|Lees [https://en.wikipedia.org/wiki/Transport_Layer_Security hier] over SSL/TLS.}}
*'''SMTP debug mode''' - It comes with three options:
*'''SMTP debug-mode''': Er zijn drie waarden.
**''Off'' (default value): The user wants this activated only in the case in which the SMTP relay does not work and further details are needed in order remedy the technical problem
**''Uit'' (standaardwaarde): De gebruiker wil dat dit alleen actief maken als SMTP niet werkt en er informatie nodig is om het op te lossen;
**''On errors'' : A detailed connection log and error message will be given if an error occurs
**''Bij fouten'' : bij fouten wordt er een gedetailleerde connectie-log en foutenmelding gdaan;
**''Always'' : It gives valuable information on how a SMTP relay works. If an error occurs, further details are provided
**''Altijd'' : Informatie over de werking van SMTP, meer uitgebreid bij fouten.
*'''Email batch size''': When sending invitations or reminders to survey participants, this setting helps the administrator determine how many emails can be sent in one bunch. Different web servers have different email capacities, and if your script takes too long to send a bunch of emails, the script could time out and cause errors. Most web servers can send 100 emails in one go within the default 30 second time limit for a PHP script. If you get script timeout errors when sending large numbers of emails, reduce the number with the help of this setting. Clicking the 'send email invitation' button that is located on the token control toolbar on the right of each token sends the 'maxemails' number of invitations, displaying a list of the addresses to which the email was already delivered and a warning that ''"There are more emails pending than could be sent in one batch. Continue sending emails by clicking below. There are ### emails still to be sent."'' and provides a "continue button" to proceed with the next batch. So, the user determines when to send the next batch after each batch gets emailed. It is not necessary to wait with this screen active. The admin could log off and come back at a later time to send the next batch of invites
*'''E-mail batch grootte''': Als je uitnodigingen of herinneringen stuurt aan deelnemers bepaalt deze instelling hoeveel mails er in een batch maximaal verstuurd mogen worden. Als dit getal te hoog staat kan het zijn dat het mailscript in een time-out loopt. Een gemiddelde webserver kan ongeveer 100 mails versturen in de 30 seconden dat een script draait. Krijg je time-outs, zet dan hier een lager aantal neer.


==Bounce instellingen==
==Bounce settings==
*'''Standaard site bounce e-mail''': Dit is het e-mailadres waar niet verzonden email naar gestuurd wordt.
*'''Default site bounce email''': This is the email address where bounced emails will be sent to. For faster bounce back processing, the email address box should be limited to bounce back only
*'''Servertype''': Als je dit op 'Uit' zet, dan vindt er geen bounce verwerking plaats. Zet dit op 'POP' of 'IMAP' om te controleren of een bijbehorend account bestaat.
*'''Server type''': If set to 'Off', no bounce processing functions will be available. Set this to 'POP' or 'IMAP' to check a related account for bounces
*'''Servernaam en poort''': Naam van de server en (indien nodig) de poort gescheiden door een dubbele punt.
*'''Server name & port''': Name of the server and (if needed) the port separated by a colon. The port number isn't typically needed unless the email host uses a non-standard port
*'''Gebruikersnaam''': De gebruikersnaam (user name) van het POP/IMAP account.
*'''User name''': The user name for the POP/IMAP account
*'''Wachtwoord''': Het wachtwoord (password) van het POP/IMAP account.
*'''Password''': The password for the POP/IMAP account
*'''Encryptiemethode''': Indien er encryptie wordt gebruikt, geef dan hier het type aan (SSL of TLS)
*'''Encryption type''': If encryption is used, please set the right one here (SSL or TLS)


==Beveiliging==
==Security==
*'''Voorvertonen enquête alleen voor beheerders''': Een voorvertoning van inactieve enquêtes is standaard alleen toegestaan als je daarvoor geautoriseerd bent. Zet deze op "Nee" als iedereen de enquête mag testen, zonder in het beheergedeelte in te loggen, en zonder dat de enquête actief is.
*'''Survey preview only for administration users''': By default, the preview of inactive surveys is restricted only to authenticated. If you set this to 'No', any person can test your survey using the survey URL - without logging in to the administration and without having to activate the survey first
*'''Filter HTML op XSS''': De beheerder van de enquête heeft standaard geen mogelijkheid om 'gevaarlijke' html-tags te gebruiken (zoals JavaScript of Flash). Om dit wel mogelijk te maken moet je deze instelling op "Nee" zetten. (Specifiek script voor video-hoster kan worden gebruikt). De XSS-filtering is altijd uitgeschakeld voor de hoofdbeheerder. Om de werking van de XSS-filtering te testen moet je dus een gewoon gebruikersaccount gebruiken. {{Alert|title=Waarschuwing|text=Met XSS ingeschakeld kan niet het hele expressiebeheersysteem worden gebruikt  : [[Expression Manager/nl#XSS beveiliging|uitleg.]]}}
*'''Filter HTML for XSS''': It is  turned 'on' by default, even for super-administrators. They will not be authorized to use dangerous HTML tags in their survey/group/question/labels texts (JavaScript code for instance). The idea behind this is to prevent a survey operator to add a malicious script in order to get his permissions raised on your system. '''However, if you want to use any script objects like Javascript scripts of Flash applets in your surveys, you will need to switch this off''' (specific scripts for video hosting platforms can be used). In order to see the effects of XSS filtering, it is advised to use a regular user account
*'''Groepsleden kunnen alleen hun eigen groep zien''': Niet-beheerders (opgenomen in de LimeSurvey beheerinterface) kunnen standaard alleen andere gebruikers zien als ze beiden aan minstens één dezelfde groep gekoppeld zijn. Zet deze instelling op "nee" om de niet-beheerders alle gebruikers die in de LimeSurvey [[Manage users/nl|Gebruikersbeheer]] gedefinieerd zijn, te laten zien, ongeacht tot welke groep ze behoren.
{{Alert|title=Warning|text=With XSS enabled, some parts of the expression manager system can not be used: see [[Expression Manager#XSS security|XSS and Expression Manager]].}}
*'''IFrame toegestaan''': Deze optie wordt gebruikt om aan te geven of een webbrowser de enquête-pagina in een <frame>, <iframe> of <object> mag plaatsen . Je kunt het stelen van klikken  voorkomen door niet toe te staan. Als je het toestaat dan is er geen beperking. De waarde 'Zelfde bron' zorgt ervoor dat het alleen toegestaan is op hetzelfde domein en poort waarop de enquête wordt uitgevoerd.
*'''Group member can only see own group''': By default, non-admin users defined in the LimeSurvey management interface will only be able to see other users only if they belong to at least one common group. If the administrator sets this to 'No', then the users can see all the users defined in the LimeSurvey [[Manage users|User Control panel]], regardless of the group they belong to
{{Hint|Text=Deze functie is afhankelijk van de gebruikte webbrowser en daarom kan het wel/niet toestaan van iframes niet werken.}}  
*'''IFrame embedding allowed''': This option can be used to indicate whether or not a browser should be allowed to render the survey page in a <frame>, <iframe> or <object>. You can use this to avoid clickjacking attacks, by ensuring that your survey is not embedded into other sites. If you set it to 'Allow' (the default value), there is no restriction. Setting this to 'Same origin' will make the content to be loaded only if the survey runs on the same domain and port as the including <frame>, <iframe> or <object>
*'''Forceer HTTPS''': Staat standaard op "Uit". Zet deze instelling aan om het gebruik van HTTPS te verplichten.
{{Hint|Text=Theoretically, it is working. However, this function might not work when it is enabled because it heavily depends on the used web browser and whether it allows iframes or not.}}
{{Alert||title=Let op|text=Als de server HTTPS niet goed ondersteunt, kun je jezelf buitensluiten! Test daarom eerst of "Controleer of de link werkt" werkt. Mocht dat niet het geval zijn, laat dan HTTPS uitstaan, anders crasht LimeSurvey en kun je er niet meer bij.}}
*'''Force HTTPS''': This is set by default to "Don't force on/off". Switch the setting to "On" to force the connection to use HTTPS
{{Hint/nl|Text=Als je HTTPS per ongeluk hebt ingeschakeld, dan kun je het uitschakelen door in application/config/config.php de instelling ssl_emergency_override op 1 te zetten.}}
{{Alert|title=Attention|text=If your server doesn't support HTTPS properly, you can lock yourself from the system! Therefore, click on the '''"check if this link works"''' located below the option. If the link does not work and you turn on HTTPS, LimeSurvey will break and you won't be able to access it.}}  
{{Hint|Text=If you activate HTTPS by mistake, you can deactivate it in application/config/config.php file, changing the value of  ssl_emergency_override to 1.}}


==Presentatie==
==Presentation==
*'''Show question number and/or question code''': What to be shown to the survey participants - the question number and/or the question code, both or none. There is also a fifth option in which this option can be selected by the survey admin. The number of the questions is shown in the moment in which someone wishes to start the survey, while the question code is shown next to each question from the survey.
*'''Show question number and/or question code''': What to be shown to the survey participants - the question number and/or the question code, both or none. There is also a fifth option in which this option can be selected by the survey admin. The number of the questions is shown in the moment in which someone wishes to start the survey, while the question code is shown next to each question from the survey
*'''Herhaal kopregels in array vragen elke X subvragen''': Bij vragen van het type 'array (flexibel)' zitten vaak veel subvragen, die mogelijk meer dan een schermpagina vullen. Deze instelling laat de kop opnieuw tonen na dit aantal antwoorden. Een redelijk geschikte waarde is 25. Als je geen herhaling wilt hebben, laat dan de waarde op "0" staan.
*'''Repeating headings in array questions every X sub-questions''': If you use array type questions, you'll often have a lot of sub-questions, which - when displayed on screen - take up more than one page. The repeat-headers setting lets you decide how many answers should be displayed before repeating the header information for the question. A good setting for this is around 25. If you don't want the headings to repeat at all, set this to 0
*'''Toon "Er zijn X vragen in deze enquête"''': It shows the number of questions the survey contains to the user participants.
*'''Show "There are X questions in this survey"''': It shows the number of questions the survey contains to the user participants
*'''Font size of PDFs''': 9 is the default size for normal text. The group title font size is the value introduced in this box plus two, while the font size  of the survey's title is the value introduced in this box plus four. In the default case scenario, the PDF uses a font size of 9 for normal text, of 11 for group titles, and of 13 for the title of the survey.
*'''Font size of PDFs''': 9 is the default size for normal text. The group title font size is the value introduced in this box plus two, while the font size  of the survey's title is the value introduced in this box plus four. In the default case scenario, the PDF uses a font size of 9 for normal text, of 11 for group titles, and of 13 for the title of the survey
*'''Width of PDF header logo''': the 'dimension' of the PDF header logo. ''The logo appears only on the PDF file that includes the answers of the survey participants to a survey - a survey participant may wish to export his answers after completing the survey.''
*'''Width of PDF header logo''': the 'dimension' of the PDF header logo. ''The logo appears only on the PDF file that includes the answers of the survey participants to a survey - a survey participant may wish to export his answers after completing the survey.''
*'''PDF header title''': If it is left empty, the site name will be used. ''The PDF header title appears only on the PDF file that is the result of the survey participant's wish to export his answers after completing a survey.''
*'''PDF header title''': If it is left empty, the site name will be used. ''The PDF header title appears only on the PDF file that is the result of the survey participant's wish to export his answers after completing a survey.''
*'''PDF header string''': If empty, the survey name will be used. ''The PDF header string appears only on the PDF file that is the result of the survey participant's wish to export his answers after completing a survey.''
*'''PDF header string''': If empty, the survey name will be used. ''The PDF header string appears only on the PDF file that is the result of the survey participant's wish to export his answers after completing a survey.''
*'''Toon vraaggroepsnaam en/of beschrijving''': It works in the same manner as the '''Show question number and/or question code''' function.  
*'''Show question group title and/or description''': It works in the same manner as the '''Show question number and/or question code''' function.  
*'''''Toon optie 'geen antwoord' bij niet verplichte vragen''': Als een vraag van type radio/select is en wijzigbare antwoorden heeft (oftewel lijst- en arrayvragen), en deze instelling staat op "Ja", dan toont LimeSurvey standaard een "Geen antwoord"-optie. Zo kunnen deelnemers er voor kiezen de vraag niet te beantwoorden. Zet deze instelling op "Nee" om deze optie niet standaard te bieden.
*'''Show 'no answer' option for non-mandatory questions''': When a radio button/select type question that contains editable answers (i.e.: List & array questions) is not mandatory and the "show 'no answer'" is also enabled (default), an additional entry "No answer" is shown for each sub-question - so that survey respondents may choose not to answer the question. You can select from the global settings one of the following options:
**''Selectable'' : The users have the possibility to choose whether the question is non-mandatory or not when they create create/edit a question;
**''Selectable'' : If the LimeSurvey administrator selects it, a survey administrator can choose whether his/her own survey displays the "no answer" option for non-mandatory questions or not (see the [[Presentation]] wiki section for more details)
**''On'' (default value): If this option is chosen, the users can create questions with the 'no answer' option for non-mandatory questions ;
**''On'' (default value): If this option is chosen, all non-mandatory questions will contain the "no answer" option - this cannot be changed by the survey administrator because the global settings trump [[Survey settings|survey settings]]
**''Off'' : If off, the users cannot create non-mandatory questions that have the 'non answer' option available for the survey participants.
**''Off'' : If off, the non-mandatory questions will not display any "no answer" option - this cannot be changed by the survey administrator because the global settings trump the [[Survey settings|survey settings]]
*'''Show header in answers export PDFs''': Turn it off (default) if you would like to see nothing in the header of the PDF that contains the answers of the respondents. If it is turned on, the following information will be displayed in the header of the PDF that contains the respondents' answers.
*'''Show header in answers export PDFs''': Turn it off (default) if you would like to see nothing in the header of the PDF that contains the answers of the respondents. If it is turned on, the following information will be displayed in the header of the PDF that contains the respondents' answers
*'''Add gray background to questions in PDF''': It is turned 'On' by default. ''This function refers to export-responses PDFs.''
*'''Add gray background to questions in PDF''': It is turned 'On' by default. ''This function refers to export-responses PDFs.''
*'''PDF questions in bold''': It is turned 'Off' by default. ''This functions refer to export-responses PDFs.
*'''PDF questions in bold''': It is turned 'Off' by default. ''This functions refer to export-responses PDFs.
*'''Borders around questions in PDF''': It is turned 'On' by default. ''This function refers to export-responses PDFs.''
*'''Borders around questions in PDF''': It is turned "On" by default. ''This function refers to export-responses PDFs.''
*'''Borders around responses in PDF''': It is turned 'On' by default. ''This function refers to export-responses PDFs.'
*'''Borders around responses in PDF''': It is turned "On" by default. ''This function refers to export-responses PDFs.'


<div class="simplebox">[[File:help.png]] Alle bovenstaande opties beïnvloeden '''alleen''' de parameters van de PDF die antwoorden/responsen bevat van een enquête. De bovenstaande opties zijn dus alleen van belang als je antwoorden naar PDF exporteert.</div>
<div class="simplebox">[[File:help.png]] Alle bovenstaande opties beïnvloeden '''alleen''' de parameters van de PDF die antwoorden/responsen bevat van een enquête. De bovenstaande opties zijn dus alleen van belang als je antwoorden naar PDF exporteert.</div>
<div class="simplebox">[[File:help.png]] In LimeSurvey kun je enquêtes ook printen en dan op papier invullen.. De PDF-functie is nog niet volmaakt, het is een experimentele optie waarvan de parameters gewijzigd kunnen worden zowel in 'Style' van de [https://manual.limesurvey.org/Exporting_a_survey_structure/nl#Exporteer_queXML_formaat_(.xml) queXML] als in het bestand [https://manual.limesurvey.org/Optional_settings/nl#Statistieken_en_respons_bekijken config.php].</div>
<div class="simplebox">[[File:help.png]] In LimeSurvey kun je enquêtes ook printen en dan op papier invullen.. De PDF-functie is nog niet volmaakt, het is een experimentele optie waarvan de parameters gewijzigd kunnen worden zowel in 'Style' van de [https://manual.limesurvey.org/Exporting_a_survey_structure/nl#Exporteer_queXML_formaat_(.xml) queXML] als in het bestand [https://manual.limesurvey.org/Optional_settings/nl#Statistieken_en_respons_bekijken config.php].</div>


==Taal==
==Language==
*'''Standaardtaal''': Dit is de taal waarin het beheerpaneel en de openbare enquêtes getoond worden. Binnen een enquête kun je zelf een andere taal gebruiken.
*'''Default site language''': The default language that is used in your administration panel can be selected via this option. It also gives the default language for the public survey list if none is given
*'''Beschikbare talen''': Kies hier de taal/talen die als optie gegeven worden bij het instellen van de taal.
*'''Available languages''': If you don't want all languages to be available in the 'default site language' box, just remove them from the left box


==Interfaces==
==Interfaces==
*'''RPC interface actief''': Met deze instelling kun je de LimeSurvey [[RemoteControl_2_API|RemoteControl2]] interface API aan- en uitzetten. De opties zijn JSON-RPC (aanbevolen) en XML-RPC.
*'''RPC interface enabled''': Using this feature you can activate/deactivate the LimeSurvey [[RemoteControl 2 API|RemoteControl2]] interface API, either using JSON-RPC (recommended) or XML-RPC


*'''Publiceer API op /admin/remotecontrol''': Als je deze optie inschakelt dan komt er onder de opgegeven URL een korte beschrijving van de API-functies beschikbaar. Dit is alleen bedoeld voor het debuggen en dus niet voor actieve enquêtes.
*'''Publish API on /admin/remotecontrol''': If you activate this option, then under the specified URL a short description of the API functions will be available. Usually, you should not need to activate it and should only be activated for debug purposes in general

Revision as of 16:05, 16 January 2018

Other languages:

Algemene beschrijving

Als je op de knop 'Configuratie' en daarna op Algemene instellingen en het tabblad Algemeen klikt zie je de instellingen.

Deze instellingen zijn alleen benaderbaar voor beheerders met de juiste instellingen en plugins. Hier kunnen bepaalde instellingen gewijzigd worden.

Instellingen en hun omschrijving

Overview

  • Overview: provides the following general information about your LimeSurvey installation:
    • Users: shows the number of users that can access the LimeSurvey installation via the internal database authentication system
    • Surveys: shows the total number of (active & inactive) surveys
    • Active surveys: shows the total number of active surveys (that can be accessed by other users via the web)
    • Deactivated result tables: at some point, you might want to change some questions during the survey runtime. If you do this, all the prior answers associated with the respective survey will be dissociated from the newly edited survey. The data that was previously collected will be stored in 'deactivated result tables'
    • Active token tables: shows the number of active token tables (that have a corresponding active survey)
    • Deactivated token tables: shows the number of deactivated token tables
Check our short introduction on tokens for further information.
  • Updates (Obsolete since 2.06): for automatic updates, please use the ComfortUpdate feature. In the later versions, it can be found under the Advanced tab that is located in the Configuration dialog from the main Limesurvey toolbar
Er is ook een knop waarmee je de PHP informatie kunt bekijken, handig bij het oplossen van problemen in de installatie.

General

  • Site name: is your survey site name. This name will appear in the survey list overview and in the administration header
  • Default template: This setting specifies the default design template used for the 'public list' of surveys and for new surveys or surveys using a non-existing template. If you would like to use a personalized template, read about how you can use the LimeSurvey's template editor
The templates are stored in '/limesurvey/templates/'.
  • Administration template: This setting specifies the default design template used for the LimeSurvey administration. To use a customized template, add it in '/limesurvey/upload/admintheme/'
  • Time difference (in hours): If your web server is in a different time zone to the location where your surveys will be based, put the difference between your server and your home time zone here. For example, I live in Australia, but I got a US web server. The web server is 14 hours behind my local time zone. So my setting here is "+14". In other words, it adds 14 hours to the time of the web server. This setting is particularly important when surveys timestamp the responses
  • Session lifetime (seconds) (only available with database sessions): Defines the time in seconds after which a survey session expires (provided there is no action from the participant). When using regular, file-based sessions, it is up to the system administrator to define the right values for 'session.gc_maxlifetime', 'session.save_path', etc., in the PHP configuration. Not only the web server settings but also the other similar settings of other applications may overwrite the setting for file-based sessions when editing it locally via the application. The maximum value that can be introduced is 65000 (seconds). It is recommendable to use a reasonable value. Bear in mind that, when using database sessions, check whether the MySQL setting called max_allowed_packet is set to a large value because some surveys generate over 2 MB of session data
  • IP Info DB API Key: Allows integration with the IP-Info-DB service, which let's you determine the geographic location of survey takers based on their IP. To use a key, you need to register for the API
  • Google Maps API Key: Allows for integration with Google Maps
  • Google Analytics Tracking ID: Allows for integration with Google Analytics. Surveys can override this site-level value. The tracking ID can be inserted into templates using {GOOGLE_ANALYTICS_API_KEY}. The full JavaScript that Google Analytics expects to find (including the key) can be included in templates via {GOOGLE_ANALYTICS_JAVASCRIPT}
For further details on how to use Google's API with LimeSurvey, check our Google API howto page.
  • Google Translate API Key:  The Auto Translate feature uses version 2 of Google Translate's API. Google charges for this service. In order for the Auto Translate feature to work, get an API key from this site, and then enter the key in this field
  • Character set for file import/export: You can specify the character set most suiting you and your system, if you experience problems with the exporting/importing functions
  • Side-menu behavior (Obsolete since 3.0): How the side-menu should behave while editing surveys. The default value is 'Adaptive', meaning that the side-menu can be changed when and how the users want. The other values are 'Always open' and 'Always closed'
  • Default HTML editor mode: Sets the default mode for integrated HTML editor. The valid settings are:
    • inline (default): Inline replacement of fields by an HTML editor. Slow, but convenient and user-friendly
    • popup : Adds an icon that opens a popup window with the HTML editor. Faster, but the HTML code is displayed on the form
    • HTML source : No HTML editor used, just the plain html source
  • Question type selector: Choose 'Full selector' to get a question type selector with preview and 'Simple' to get a plain select box
  • Template editor: Choose 'Full template editor' to get an enhanced editor (with syntax-highlighting) when editing survey templates and 'Simple template editor' to get a plain editor field
  Attention : You will observe that some of the options can be found in your user's preferences, under Your personal settings tab. If you change the respective options from the global settings of your LimeSurvey installation, the 'default' option from the drop-down list of each option that is located under 'Your personal settings' tab will inherit the global settings values. For example, if you, as a user with Settings & Plugins permissions, change the HTML editor mode to the 'popup' mode, all the other users that have chosen the 'default value' option from the HTML editor mode in their personal settings will also use the popup option.


Email settings

  • Default site admin email: This is the default email address of the site administrator and it is used for system messages and contact options
  • Administrator name: The real name of the site administrator
  • Email method: This determines how emails are being sent. The following options are available:
    • PHP (default value): uses internal PHP mail function
    • Sendmail : uses sendmail mailer
    • SMTP : based on SMTP relaying. Use this setting when you are running LimeSurvey on a host that is not your mail server
      • Make sure that you are using your SMTP configured email (Global settings -> Email settings) if you use SMTP, otherwise there might be a chance that the following error is displayed: 'SMTP -> ERROR: RCPT not accepted from server: 553 5.7.1 : Sender address rejected: not owned by user'
    • Qmail : Set this if you are running the Qmail mailer
  • SMTP host: If you use 'SMTP' as email method, then you have to put your SMTP server here. If you are using a different port than port 25 (standard for SMTP), then you have to add the port number separated be a colon (example: 'smtp.gmail.com:465')
  • SMTP username: If your SMTP-server needs authentication, set this to your user name, otherwise it must be blank
  • SMTP password: If your SMTP-server needs authentication, set this to your password, otherwise it must be blank
  • SMTP encryption - Three options are available:
    • Off (default value)
    • SSL
    • TLS
Check the following link for further details about SSL/TLS.
  • SMTP debug mode - It comes with three options:
    • Off (default value): The user wants this activated only in the case in which the SMTP relay does not work and further details are needed in order remedy the technical problem
    • On errors : A detailed connection log and error message will be given if an error occurs
    • Always : It gives valuable information on how a SMTP relay works. If an error occurs, further details are provided
  • Email batch size: When sending invitations or reminders to survey participants, this setting helps the administrator determine how many emails can be sent in one bunch. Different web servers have different email capacities, and if your script takes too long to send a bunch of emails, the script could time out and cause errors. Most web servers can send 100 emails in one go within the default 30 second time limit for a PHP script. If you get script timeout errors when sending large numbers of emails, reduce the number with the help of this setting. Clicking the 'send email invitation' button that is located on the token control toolbar on the right of each token sends the 'maxemails' number of invitations, displaying a list of the addresses to which the email was already delivered and a warning that "There are more emails pending than could be sent in one batch. Continue sending emails by clicking below. There are ### emails still to be sent." and provides a "continue button" to proceed with the next batch. So, the user determines when to send the next batch after each batch gets emailed. It is not necessary to wait with this screen active. The admin could log off and come back at a later time to send the next batch of invites

Bounce settings

  • Default site bounce email: This is the email address where bounced emails will be sent to. For faster bounce back processing, the email address box should be limited to bounce back only
  • Server type: If set to 'Off', no bounce processing functions will be available. Set this to 'POP' or 'IMAP' to check a related account for bounces
  • Server name & port: Name of the server and (if needed) the port separated by a colon. The port number isn't typically needed unless the email host uses a non-standard port
  • User name: The user name for the POP/IMAP account
  • Password: The password for the POP/IMAP account
  • Encryption type: If encryption is used, please set the right one here (SSL or TLS)

Security

  • Survey preview only for administration users: By default, the preview of inactive surveys is restricted only to authenticated. If you set this to 'No', any person can test your survey using the survey URL - without logging in to the administration and without having to activate the survey first
  • Filter HTML for XSS: It is turned 'on' by default, even for super-administrators. They will not be authorized to use dangerous HTML tags in their survey/group/question/labels texts (JavaScript code for instance). The idea behind this is to prevent a survey operator to add a malicious script in order to get his permissions raised on your system. However, if you want to use any script objects like Javascript scripts of Flash applets in your surveys, you will need to switch this off (specific scripts for video hosting platforms can be used). In order to see the effects of XSS filtering, it is advised to use a regular user account
  Warning : With XSS enabled, some parts of the expression manager system can not be used: see XSS and Expression Manager.


  • Group member can only see own group: By default, non-admin users defined in the LimeSurvey management interface will only be able to see other users only if they belong to at least one common group. If the administrator sets this to 'No', then the users can see all the users defined in the LimeSurvey User Control panel, regardless of the group they belong to
  • IFrame embedding allowed: This option can be used to indicate whether or not a browser should be allowed to render the survey page in a <frame>, <iframe> or <object>. You can use this to avoid clickjacking attacks, by ensuring that your survey is not embedded into other sites. If you set it to 'Allow' (the default value), there is no restriction. Setting this to 'Same origin' will make the content to be loaded only if the survey runs on the same domain and port as the including <frame>, <iframe> or <object>
 Hint: Theoretically, it is working. However, this function might not work when it is enabled because it heavily depends on the used web browser and whether it allows iframes or not.
  • Force HTTPS: This is set by default to "Don't force on/off". Switch the setting to "On" to force the connection to use HTTPS
  Attention : If your server doesn't support HTTPS properly, you can lock yourself from the system! Therefore, click on the "check if this link works" located below the option. If the link does not work and you turn on HTTPS, LimeSurvey will break and you won't be able to access it.


 Hint: If you activate HTTPS by mistake, you can deactivate it in application/config/config.php file, changing the value of ssl_emergency_override to 1.


Presentation

  • Show question number and/or question code: What to be shown to the survey participants - the question number and/or the question code, both or none. There is also a fifth option in which this option can be selected by the survey admin. The number of the questions is shown in the moment in which someone wishes to start the survey, while the question code is shown next to each question from the survey
  • Repeating headings in array questions every X sub-questions: If you use array type questions, you'll often have a lot of sub-questions, which - when displayed on screen - take up more than one page. The repeat-headers setting lets you decide how many answers should be displayed before repeating the header information for the question. A good setting for this is around 25. If you don't want the headings to repeat at all, set this to 0
  • Show "There are X questions in this survey": It shows the number of questions the survey contains to the user participants
  • Font size of PDFs: 9 is the default size for normal text. The group title font size is the value introduced in this box plus two, while the font size of the survey's title is the value introduced in this box plus four. In the default case scenario, the PDF uses a font size of 9 for normal text, of 11 for group titles, and of 13 for the title of the survey
  • Width of PDF header logo: the 'dimension' of the PDF header logo. The logo appears only on the PDF file that includes the answers of the survey participants to a survey - a survey participant may wish to export his answers after completing the survey.
  • PDF header title: If it is left empty, the site name will be used. The PDF header title appears only on the PDF file that is the result of the survey participant's wish to export his answers after completing a survey.
  • PDF header string: If empty, the survey name will be used. The PDF header string appears only on the PDF file that is the result of the survey participant's wish to export his answers after completing a survey.
  • Show question group title and/or description: It works in the same manner as the Show question number and/or question code function.
  • Show 'no answer' option for non-mandatory questions: When a radio button/select type question that contains editable answers (i.e.: List & array questions) is not mandatory and the "show 'no answer'" is also enabled (default), an additional entry "No answer" is shown for each sub-question - so that survey respondents may choose not to answer the question. You can select from the global settings one of the following options:
    • Selectable : If the LimeSurvey administrator selects it, a survey administrator can choose whether his/her own survey displays the "no answer" option for non-mandatory questions or not (see the Presentation wiki section for more details)
    • On (default value): If this option is chosen, all non-mandatory questions will contain the "no answer" option - this cannot be changed by the survey administrator because the global settings trump survey settings
    • Off : If off, the non-mandatory questions will not display any "no answer" option - this cannot be changed by the survey administrator because the global settings trump the survey settings
  • Show header in answers export PDFs: Turn it off (default) if you would like to see nothing in the header of the PDF that contains the answers of the respondents. If it is turned on, the following information will be displayed in the header of the PDF that contains the respondents' answers
  • Add gray background to questions in PDF: It is turned 'On' by default. This function refers to export-responses PDFs.
  • PDF questions in bold: It is turned 'Off' by default. This functions refer to export-responses PDFs.
  • Borders around questions in PDF: It is turned "On" by default. This function refers to export-responses PDFs.
  • Borders around responses in PDF: It is turned "On" by default. This function refers to export-responses PDFs.'
Alle bovenstaande opties beïnvloeden alleen de parameters van de PDF die antwoorden/responsen bevat van een enquête. De bovenstaande opties zijn dus alleen van belang als je antwoorden naar PDF exporteert.
In LimeSurvey kun je enquêtes ook printen en dan op papier invullen.. De PDF-functie is nog niet volmaakt, het is een experimentele optie waarvan de parameters gewijzigd kunnen worden zowel in 'Style' van de queXML als in het bestand config.php.

Language

  • Default site language: The default language that is used in your administration panel can be selected via this option. It also gives the default language for the public survey list if none is given
  • Available languages: If you don't want all languages to be available in the 'default site language' box, just remove them from the left box

Interfaces

  • RPC interface enabled: Using this feature you can activate/deactivate the LimeSurvey RemoteControl2 interface API, either using JSON-RPC (recommended) or XML-RPC
  • Publish API on /admin/remotecontrol: If you activate this option, then under the specified URL a short description of the API functions will be available. Usually, you should not need to activate it and should only be activated for debug purposes in general
Retrieved from "http://manual.limesurvey.org/index.php?title=Global_settings/nl&oldid=84776"