Set di etichette
From LimeSurvey Manual
Generale
I set di etichette sono modelli di elenco in cui ogni elenco ha un set di codici con etichette e può essere utilizzato nella maggior parte dei tipi di domande sia come risposte che come sottodomande. Tieni presente che i set di etichette di LimeSurvey vengono semplicemente copiati nella domanda specifica come sottodomande o risposte. Pertanto, se si modifica un set di etichette dopo averlo "utilizzato" in un questionario, le modifiche non si propagheranno alle domande del questionario in cui è utilizzato il rispettivo set di etichette.
Questo nuovo utilizzo dei set di etichette offre molta più flessibilità per lo sviluppo futuro e rende più logica la struttura di una domanda.
Di seguito è riportato un esempio di set di etichette per aiutarti a comprendere meglio il concetto. Fai clic qui se vuoi andare direttamente alle funzioni di gestione dei set di etichette di LimeSurvey.
Se si desidera definire una scala a 7 punti personalizzata, un set di etichette fornisce questa funzione. Nell'esempio seguente, un'etichetta personalizzata molto semplice impostata con le coppie codice/etichetta (l'etichetta è ciò che appare nelle domande effettive).
Codice | Etichetta |
1 | Per niente utile |
2 | 2 |
3 | 3 |
4 | Abbastanza utile |
5 | 5 |
6 | 6 |
7 | Molto utile |
Di seguito è riportato un esempio grafico in cui vengono utilizzate tre diverse faccine al posto del testo dell'etichetta:
Insiemi di etichette - come...
Fare clic su 'Gestisci set di etichette nel menu Configurazione per modificare, creare, eliminare, importare e/o esportare set di etichette.
...crea o importa nuovi set di etichette
Fare clic sul pulsante Crea o importa nuovi set di etichette situato nell'angolo in alto a sinistra della pagina. Puoi creare un nuovo set di etichette o importarlo da un'altra fonte:
- Nuovo set di etichette: I set di etichette devono essere creati manualmente.
- Nome set: Ogni nuovo set di etichette deve avere un nome.
- 'Lingue:' Ogni set di etichette deve essere specificato per la lingua per cui è usato. Puoi scegliere tutte le lingue che desideri dal menu.
- Importa serie di etichette: Per importare una serie di etichette, fare clic su Sfoglia e aggiungere il file della serie di etichette .lsl. Se hai precedentemente creato un set di etichette, LimeSurvey non ti consentirà di importare un set di etichette esterno simile a meno che non disattivi l'opzione Non importare se il set di etichette esiste già. Alcuni set di etichette utili sono disponibili sul sito web di LimeSurvey.
Una volta che l'etichetta è stata importata o creata, fare clic sul pulsante Salva situato nella parte in alto a destra dello schermo.
... Modificare, cancellare o esportare un set di etichette
Ciascun set di etichette che si trova nell'elenco Set di etichette ha un menu corrispondente che contiene le seguenti quattro opzioni:
- Visualizza etichette: Consente all'utente di visualizzare le etichette esistenti situate nel rispettivo set di etichette.
- Modifica set di etichette: L'utente può rinominare il set di etichette e/o aggiungere /remove languages.
- Esporta set di etichette: Esporta set di etichette in un file .lsl.
- Elimina set di etichette: Apparirà una finestra per confermare se si desidera eliminare o meno il rispettivo set di etichette.
Etichette - come...
...aggiungi un'etichetta
È necessario inserire un codice etichetta, un valore di valutazione e una descrizione dell'etichetta.
Quindi, fai clic sul segno più per aggiungere la nuova etichetta. È possibile utilizzare un grafico al posto di (o in aggiunta a) un testo di etichetta. Per fare ciò, devi utilizzare il codice HTML per includere la grafica che desideri, ad esempio:
<img border="0" src="http://www.yourdomain.at/pics/pic.gif">
To help with the editing process of the HTML-code, use the embedded HTML editor of LimeSurvey, which is located at the end of the label-text box (click on the green pen button ->).
Quick add
Another way to add labels is to use the Quick add... button. When you click it, a window be displayed. It works under the following form: Code ; Title.
You can either replace or add labels. If you click Replace, all the preexisting labels will be deleted and replaced by the ones entered by you. If you click Add, the new labels will be added into the label set (the preexisting ones not being affected).
The Code is automatically added if new entrances are created. Therefore, you can type in only the title of the labels which will automatically be assigned a code:
The assessment values cannot be edited/entered via this option - it has to be changed manually from the list of labels.
...delete a label
To delete a label, click the red trash button () located under the 'Action' column.
...rearrange a label
To rearrange the order of the labels, click the green sign () located under the column called 'Position' and re-position the label.
Se al tuo set di etichette è associata più di una lingua, puoi scegliere quale modificare. Ogni etichetta necessita di un Codice, un Valore valutazione e un titolo. Il codice può essere cambiato solo nella lingua base del del set. il valore di valutazione può essere ignorato (settandolo a 0) se non si utilizzi assessments. Il titolo è il testo che viene visualizzato nella domanda.
- Cancella-bottone: puoi cancellare etichette con questo pulsante.
- Su/Giù-bottoni: è possibile cambiare la riga dell'etichetta con i pulsanti Su e Giù.
- Controlla e Ordina: puoi verificare la consistenza ed eseguire un ordinamento dell'etichette con questo pulsante.
To add a new language: Create or import new label set(s) -> Languages -> select the languages you wish to add.
To start translating the labels into another language, select the language in which you would like to translate the labels to from the upper part of the matrix.
Gestione delle risorse caricate
In our case, the language from where the label codes and assessment values can be changed is English. Only the label description can be edited when the Romanian tab is selected - which represents the corresponding Romanian label translation of the English label.
Once you are done with the changes, do not forget to click on the 'Save changes' button located in the upper-right part of the screen.
Questa tab ti permette di gestire i file (immagini, altri file multimediali) che sono stati caricati nell'editor HTML.
For a better understanding of the label sets option, let's take a look at the following examples:
- I want to use a label set as an answer list for one question;
- I want to use labels in another language as answers;
- I want to use emoticons instead of label text;
- I want to import a label set and use it as a subquestion list.
I want to use a label set as an answer list for one question
Assuming that the label set and survey are created:
- Go to the structure of the survey and create a question group - About LimeSurvey.
- Click the Structure tab and then on the newly created question group (About LimeSurvey in our case). Look for group quick actions and choose Add new question to group:
- Type in the code and text of the question.
- To use a label set as a set of answers, pick the right type of question that can make use of label sets. The array question type is selected in our example:
- Save the question to add it into your question group.
- Once created, you will have to add subquestions and answers:
- Add at least one subquestion:
- Add answer options. Predefined label sets... option will be used:
- Select the label set you want to use:
The result should look like this:
- Save & preview the question:
I want to use labels in another language as answers
- Create a label set and select the other languages you would like to use in your survey. For further details, read our wiki on how to translate a label set in other languages.
- Edit your survey (Settings -> General Settings) by adding the additional languages you want to translate to. For more details on how to create a survey, read the following wiki.
Assuming that the label set and survey are created:
- Create a question that can make use of label sets (e.g. array question type):
- Because the array question type is selected, both the subquestions and answers need to be translated.
- Translate the subquestions. Do not forget to select the right language tab for translation:
- Translate the answers. However, because we use predefined label sets, select the right language tab to add the translated label set as answer options:
- Save & Preview the survey:
I want to use emoticons instead of label text
Assuming that the survey is created:
- Create a label set and access it. Instead of writing in the Title column, open the HTML editor by clicking on the green pen and add graphics instead of text:
The HTML editor offers you a more comprehensive view on how different options can be used to enhance your survey. It is not necessary to have HTML knowledge because the toolbar is self-explaining (for further details you can either hover the mouse over the options or click on that option for more details). By using such an editor, you can also add (for example) smileys, images and/or videos that are either hosted online or on your server.
In this example. three smileys have been added:
- Create a question that can make use of label sets as predefined answers (e.g. array question type):
- Edit the subquestions and the answer options
- Set predefined labels as answer options.
- Save and preview the question:
I want to import a label set and use it as a subquestion list
Assuming that the survey is created:
- Go to Configuration and click Manage label sets button.
- Click Create or import new label set(s) (in the upper-left side of the screen) -> Import label set(s). Browse your computer and select the .lsl file (the label set format).
- Now that the label set was uploaded, create a question that requires the usage of subquestions (array question types).
- Edit subquestions.
- Load the imported label set:
- Save and preview.