Vurderinger
From LimeSurvey Manual
Tip: Du kan oprette mere sofistikerede vurderinger og rapporter ved hjælp af ExpressionScript. Det giver dig adgang til alle variabeltyper og nemt generere skræddersyede rapporter på ethvert tidspunkt i undersøgelsen (ikke kun i slutningen). Ved at bruge den nye Ligning spørgsmålstype kan LimeSurvey automatisk gemme dine vurderingsberegninger og/eller rapportere til databasen.
Introduktion
LimeSurvey indeholder en funktion, der gør det muligt for undersøgelsesadministratorer at oprette undersøgelses "vurderinger" for undersøgelsesdeltagere - selv for flersprogede undersøgelser. Evalueringer er regler, der evaluerer svarene på en undersøgelse umiddelbart efter, at den er indsendt, og viser tekstblokke til undersøgelsesdeltageren (baseret på denne evaluering).
For at bruge LimeSurveys vurderingsfunktion skal du fra Survey-menuen klikke på fanen Evalueringer.
Du kan derefter aktivere vurderingstilstanden.
For at oprette og redigere vurderinger i de ældre versioner af LimeSurvey (f.eks. 2.x), skal du åbne undersøgelsesindstillingerne og aktivere vurderingstilstanden fra fanen Meddelelse og datastyring . Yderligere felter, hvor du kan indføre vurderingsværdier, vil blive vist, når du redigerer svar.Hvordan fungerer vurderinger?
Det følgende er et eksempel, der forhåbentlig vil hjælpe dig med bedre at forstå, hvordan vurderingstilstand er designet til at fungere.
Forestil dig, at du har to spørgsmål i din undersøgelse, det første spørgsmål spørger, om brugeren ryger: "ryger du?". Spørgsmålet har 3 mulige svar, "Ja, mere end 10 pr. dag" med en værdi på "10", "Ja, men mindre end 10 pr. dag" med en værdi på "5" og "Nej, det gør jeg ikke røg overhovedet" med en vurderingsværdi på "1".
Det andet spørgsmål "Træner du?" har tre mulige svar: "Ja, jeg træner mindst en halv time tre gange om ugen" med værdien "1", "Ja, jeg træner lejlighedsvis" med værdien "5" og "Nej, det gør jeg ikke øvelse" med en svarkode/værdi på "10".
Hvis vi skulle tilføje totalerne af værdierne for hvert muligt svar i slutningen af undersøgelsen, ville vi få en god indikation af respondentens generelle helbred. En person, der ryger og aldrig laver nogen øvelser, får 10 point for hvert svar og får en samlet score på 20, når vi lægger de to værdier sammen. En person, der ikke ryger og motionerer, vil score 1 for hvert svar, hvilket i sidste ende får en samlet score på 2.
Assessments
Assessments page:
To create new assessments rules complete the fields located below the Assessment rules table. The following options are available:
- Scope: You can choose either Total or Group. The first will create an assessment based on the sum of all the submitted answers in the entire survey. The latter will create an assessment based on the sum of all the submitted answers from a question group;
- Group: The dropdown list allows you to choose the question group you wish to assess.
- Minimum: The minimum score to which this assessment will apply.
- Maximum: The maximum score of answers to which this assessment will apply;
- Heading: The heading of the assessment that will appear if the assessment is going to be displayed;
- Message: The text message of the assessment - displayed at the end of the survey to the participants. You can use placeholders such as {PERC} and/or {TOTAL} to emphasize the scores of each survey question group or the total survey score. Click the green pencil button to access the HTML-editor and enhance the final message of the assessment by adding colours, tables, images, etc.
You can create as many assessments as you like, and you can create more than one assessment to display for a given score.
After adding some assessments, the possible assessments actions will be displayed under the Actions column in the Assessments rules table. From there, you can either edit or delete an assessment rule:
It is important to note that if you use assessments, you must ensure that you have not enabled the autoload the URL option. If it is enabled, no end page with the text of the assessment rule will be displayed anymore and LimeSurvey will automatically load the URL field from the Presentation. You can disable it from the same tab.
How Question types Are Evaluated
There are certain question types which can not be assessed or have to be assessed in a special way. Some of the questions cannot be used with the assessment feature. However, they can be replaced with question types that can be used with this feature. For example, a 5-point choice question can be replaced with a simple list (radio) question type.
The following question types can always be assessed:
- Array dual scale
- Array
- Array by column
- List (Dropdown)
- List (Radio)
- List with comment
- Multiple options
- Multiple options with comments
The following list contains question types that cannot be assessed:
- 5 point choice
- Array (5 point choice)
- Array (10 point choice)
- Array (Increase, Same, Decrease)
- Array (Text)
- Array (Yes/No/Uncertain)
- Array (Numbers)
- Text display
- Date
- Gender
- Huge free text
- Language switch
- Long free text
- Multiple numerical input
- Numerical input
- Ranking
- Short free text
- Yes/No
Set Assessment Values For Each Answer/Label
If enabled, the assessment mode will add an additional field between the answer code and answer option name for all the questions to be assessed.
You can also use label sets as answers options for your set of questions. Just click the Predefined label sets... button located under the answers matrix and select your predefined label set.
If you decide to use label sets, assessment values can be added to all your labels from the moment they are first created. This allows the survey administrator to quickly use predefined label sets with assessment values as answers for multiple sets of questions.
This process is less time-consuming and more practical. You can create a plan in the early stages of your survey to use only one set of label sets with predefined assessment values for multiple questions. This way, you will not have to manually add assessment values to all the answers of the questions used in your survey to be assessed.
To find out more about the label sets and their usage, read the following wiki section.Assessment Placeholders
When using assessments the following placeholders are available:
- {PERC}: Displays the score of a question group. It can be used only in the message field of the assessment rule!
- {TOTAL}: Displays the total score. It can be used only in the message field of the assessment rule!
- {ASSESSMENT_CURRENT_TOTAL}: This placeholder can be used within a survey to display the current total score. Keep in mind that the score is only updated when the respondent clicks the "Next" button. Therefore, it is useless in an all-in-one survey. Also, its use requires the existence of at least one assessment rule. Otherwise, the placeholder will not display any value.
If your survey is not anonymous, the following placeholders are available.
- {TOKEN:EMAIL}: Displays the email of the respondent from the survey participants table
- {TOKEN:FIRSTNAME}: Displays the first name of the respondent from the survey participants table
- {TOKEN:LASTNAME}: Displays the last name of the respondent from the survey participants table
- {TOKEN}: Displays the token code of the respondent from the survey participants table
Tips & Tricks
Save Assessment Value in Data
To save assessment value in data and have it in an export : you can create a Question_type_-_Equation and put {ASSESSMENT_CURRENT_TOTAL} in the equation setting.
Use {ASSESSMENT_CURRENT_TOTAL} Without Assessment Message
If you choose not to add an assessment message, then no assessment message is shown.
How to Disable the Assessment Mode
To deactivate assessment mode, go to the Survey menu and click the Data management tab. The Notification and data management panel will be displayed. Click the Enable assessment mode option and disabled it for the respective survey.
Examples
How To Use the Assessment Mode
Let's recreate the example presented above to better understand the steps you have to pursue in order to correctly use the assessment feature.
If you are unsure of how to create a survey, refer to the quick start guide.2) Activate the assessments. Go to the settings menu of the survey and click the Assessments tab. Once there, activate the feature:
3) Create a question group and start adding the questions. Your survey structure should look like this:
Attention : Do not forget to check whether the questions are the types that can be assessed! Otherwise, no assessment value field will be displayed in the edit answer options panel.
4) Add answers for each question created above. While adding/editing the answers, complete also the assessment value field for each answer:
5) Now that you know the assessment values, access the Assessments panel and start adding assessment rules. Two rules were created for this example:
The text message of the first assessment rule (You should start exercising!) will be displayed if the respondent scores between 1 and 10 points. The text message of the second assessment rule (Well, that's what I call being healthy!) will be shown if the respondent scores between 11 and 21 points.
6) Now, preview the survey and see if the assessment mode is active. At the end of the survey, a text message will be displayed based on the score obtained by the respondent.
Note: The score is not displayed in this example! If you would like to have it displayed in your assessment, create more assessment rules (for each possible scenario) or use assessment placeholders.
How To Use the Assessment Placeholders
As mentioned in the previous subsection, three assessment-related placeholders can be used: {PERC}, {TOTAL}, and {ASSESSMENT_CURRENT_TOTAL}.
In the previous example, the following result was obtained: "Well, that's what I call being healthy!". However, no score was displayed.
There are different ways to have the score displayed. You can either create 6 assessment rules to emphasize each possible score/result or use assessment placeholders. The below example explains the latter option.
As mentioned above, {PERC} and {TOTAL} can be used in the message text box of the assessment rule to emphasize the score of the current group and the total score, respectively. Let's take a look at the following two screenshots to understand their usage.
In the first screenshot, {PERC} and {TOTAL} were added into the message text box of the assessment rule.
In the second screenshot, you can see how the assessment rule looks to correctly use both placeholders. Because {PERC} is used, the scope of the assessment rule must be switched from Total to Group to correctly display the score of the question group selected from the Question group dropdown list:
After completing the survey and depending on their answers, the participants should receive the following assessment message at the end:
{ASSESSMENT_CURRENT_TOTAL} can be used only inside a survey. You can use it after each question or question group from a quiz. This way you could show each participant his or her current quiz/survey score. To use it, you could add, for example, at the beginning of every question or question group a message like: "You have accumulated till now {ASSESSMENT_CURRENT_TOTAL} points".
Hint: Check the following YouTube video to see other situations where you can use placeholders.Video tutorial
To understand the basics of the LimeSurvey assessments feature, watch the following video.