Tip vprašanja - Razvrščanje
From LimeSurvey Manual
Kratek opis
Ta tip vprašanj omogoča anketirancu razvrščanje odgovorov/možnosti po vrstnem redu glede na pomembnost postavke.
Primer: Prosimo razvrstite barve po vrsti glede na to, kako všeč vam je katera barva.
Glavne nastavitve
Obvezno (obvezno)
Opis
S pomočjo te nastavitve lahko določite ali mora anketiranec odgovoriti na vsa vprašanja ankete. Če ustvarite vprašanje z več podvprašanji, lahko z nastavitvijo min_answers določite, da bo anketiranec odgovoril le na določene dele ankete in ne vse.
If you use any of the preinstalled themes and the mandatory question attribute is enabled, a red asterisk will be shown next to the question. If you wish to hide it, please check these instructions.
Veljavne vrednosti
- Da
- Ne (privzeto)
Enabling the mandatory attribute in a ranking question type forces your respondents to assess all the answer options. If you wish to make your respondents rank a minimum and/or maximum number answer options, use the minimum answers and maximum answers question attributes to set the lower and upper limits.
Enačba relevantnosti
Opis
Vsako vprašanje vam omogoča določiti enačbo relevantnosti, ki je naslednik pogoja. Z enačbo relevantnosti lahko ustvarite veliko bolj zapleteno pogojno logiko.
Označevanje sintakse
Kadarkoli boste shranili enačbo relevantnosti, bo ovrednotena, pregledana bo tudi sintaksa enačbe. Morebitne napake bodo barvno označene, tako da jih boste lahko hitro odkrili in popravili.
Veljavne vrednosti
Vsaka enačba, ki uporablja sintakso Urejevalnika izrazov, brez zavitih oklepajev.
Primeri
Uporabni primeri: Označevanje sintakse.
Napredne nastavitve
Question theme (question_theme)
Description
It allows you to use customized themes for the respective question.
Available options
- Your created question themes which are located under the Question themes in the Themes panel.
See: https://manual.limesurvey.org/Question_themes
Note: This feature is under development at the moment.<onlyinclude>
Naključni vrstni red odgovorov (random_order)
Opis
V tem primeru sistem LimeSurvey ne upošteva vrstnega reda odgovorov oziroma podvprašanj. Razvrsti jih povsem naključno. Pri tem načinu se vrstni red odgovorov spremeni vsakič, ko se vprašanje znova prikaže, kar pomeni, če se v anketi anketiranec vrne na prejšnje vprašanje se bo vrstni red zopet spremenil. Naključni vrstni red vprašanj omogoča nepristransko odgovarjanje na vprašanja. Naključnost odgovorov na vprašanje omogočite pri nastavitvah posameznih vprašanj.
This attribute causes LimeSurvey to ignore the existing order of answer options/subquestions, and instead it orders them randomly. This option permits the survey creator to diminish the survey bias. Please note that if a question has subquestions, the order of subquestions will be randomized, not the order of the answer options.
Možnosti
- Vklopljeno
- Izklopljeno (privzeto)
Example
See this example (outside link) to better understand how to use different LimeSurvey randomization features.
Opis
If enabled, the question will always be hidden - it will not be displayed to the survey participants. This function can be used in the following scenarios:
To nastavitev lahko uporabite, če ste nadomestili vprašanje z URL povezavo in ga anketirancu ne želite prikazati (vključno z njenimi vrednostmi). S tem se izničijo postavljeni pogoji, ki se navezujejo na to vprašanje, saj le to dejansko niti ni bilo postavljeno. Če pa želite vprašanje le skriti (na primer, če želite shraniti vrednost izračunana ***on the fly ***), potem uporabite JavaScript, ki je vgrajen v izvorno kodo vprašanja.
Veljavne vrednosti
- Da
- Ne (default)
Available options
- On
- Off (default)
CSS class (css_class)
Description
If you want to add special CSS classes to certain questions, you can enter the CSS class name(s) in this box. Make sure you leave an empty space between different class names.
Valid values
- Any text string with a space between different CSS class names.
According to the W3C, CSS class names can contain only the characters [a-zA-Z, and 0-9] and ISO 10646 characters U+00A1 and higher, plus the hyphen (-) and the underscore (_). They cannot start with a digit, or a hyphen followed by a digit. LimeSurvey encodes CSS classes, but it does not fix it totally.
Show javascript alert (showpopups)
Description
Show an alert if answers exceeds the number of max answers. Else just update the expression manager tip (show it in red).
Available options
- On (default option)
- Off
Same choice height (samechoiceheight)
Description
If this option is enabled, then all the answer options defined within this question type will have the same height. For example, the height of the answer options usually defer from each other if they contain images (unless the dimension is the same across all your answer options).
Available options
- On (default value)
- Off
Same list height (samelistheight)
Description
The ranking question type makes use of a choice list (where all the answer options are displayed) and of rank list (where the answer options are ranked). If this option is activated, both lists will have the same height.
Available options
- On (default value)
- Off
Relevance help for printable survey (printable_survey_relevance_help)
Description
If you wish to print a survey, you can also print the relevance equations for each question. But, if you wish to offer instead an explanation rather than the expression on the printed form, fill in this box with the text explanation for the relevance equation.
Valid values
- Any text and/or numbers you wish to be displayed on the printable form.
Logic
Maximum columns for answers (max_col_for_ans)
Description
This option limits the number of columns created in the database (more precisely, in the answers table). If you give a value lower than maximum answers option, then this attribute will represent the upper limit of the maximum choices a respondent can make.
Valid Values
- Any positive numerical value
- The default value is the total number of answer options your question contains. The number will be displayed after you activate for the first time the survey.
Filter polja (array_filter)
Opis
Filter polja vam omogoča izbiro odgovorov, ki se prikažejo v naslednjem vprašanju z lestvico.
- Izbira več možnosti
- Izbira več možnosti s kometarji
- Več kratkih tekstovnih odgovorv
- Več številčnih odgovorov
- Lestvice in polja (5 stopenjska, 10 stopenjska, Da/Ne/Ne vem, Povečalo/Ostalo enako/Zmanjšalo, Stolpec)
- Lestvica (Dvostopenjska lestvica, besedilo, števila)
- Razvrstitev
Prav tako so lahko filtrirana tudi vsa ta vprašanja.
Nastavitev filtra
Za nastavitev filtra vnesite kodo vprašanja z več možnostmi. Na primer, če je koda vprašanja "Q1" vnesite "Q1" v vnosno polje "Filter polja" ali v vnosno polje "Izločitev filtra polja", ki se nahajajo znotraj naprednih nastavitev vprašanja, ki ga želite filtrirati. Vidni bodo samo odgovori, ki so bili izbrani znotraj vprašanja Q1.
The subquestion codes used in the first question must coincide with the subquestion codes from the second one. Otherwise, the array filter function will not filter the answers to the first question. Note: When you want to filter the "other" answer option from the first question, you need to provide a subquestion for this answer in the second question and the subquestion code for this answer needs to be "other". Check the below example to better understand how the whole system works.
Cascading
The selected options can be displayed in cascade. This means that you can select a question which filters another question, which filters another question, and so on.
Array filter example
Let's take a look at the following example to better understand the power of this setting:
In the screenshot from above, we got two questions. The first one is a multiple short text question type, while the second one is an array dual scale question type. The answers you provide in the first question will be listed in the second one. Technically, the answers you provide to the subquestions from the first question are filtered and displayed in the second question.
This example can be downloaded from the following link: limesurvey_group_32.lsg. Import this question group into your LimeSurvey installation.
Ime naključne skupine (random_group)
Opis
Vprašanje doda v skupino, kjer se vsa vprašanja prikažejo po naključnem vrstnem redu.
You can find a sample survey using randomization group name in ExpressionScript sample survey.
Veljavne vrednosti
Vnesite poljuben želen niz (na primer: 'skupina1'). Vprašanja, ki vsebujejo ta niz, bodo vključena v anketo z naključnim prikazom (=vprašanja se naključno izmenjujejo med seboj).
Question validation equation (em_validation_q)
Description
This is an equation that is used to validate the entire question (e.g, all of its parts collectively for a multi-answer question). If the question fails the validation criteria, then em_validation_q_tip message will be displayed (it uses the CSS style .error). This tip uses the .em_q_fn_validation CSS style, which is hidden by default within template.css.
The main difference between this feature and the subquestion validation equations (em_validation_sq option) is that for this feature, if the question (or question parts) fail validation, then an error message could be shown. For the subquestion validation, each text entry cell (e.g., in an array question type, but it can also be applied to single entry question types) will be styled so that the background color is (light) red.
Valid values
- Any equation that makes use of the ExpressionScript syntax, without surrounding curly braces.
Example
- You want to collect demographic information from users via a multiple short text question, and you want to validate that the user has entered a valid email address and phone number.
This example shows how the question looks with invalid answers:
And here is what it looks like with one invalid answer:
Here is how you edit a question to enter that information:
And here is part of the Show Logic File output that lets you check the accuracy of your expression and ensure that there are no syntax errors:
As you can see, the validation equation tests that both the email and phone number are either empty or match a regular expression filter.
The validation tip only shows the warning message if the phone or email appears invalid.
If you wish to import the example from above into your LimeSurvey installation, download the following .lsq file: Em_validation_q_example.zip.
Tip for whole question validation equation (em_validation_q_tip)
Description
If you are using the question validation equation, you can use this box in order to display an optional message as question tip on how the question has to be filled out.
Valid values
- Any string or equation that makes use of the ExpressionScript syntax.
Example
See the example from the question validation equation wiki section- it shows how the tip can be tailored to show which parts of a multiple short text question fail the validation criteria.
Other
Insert page break in printable view (page_break)
Opis
This attribute is only active when you actually print a survey from the Printable View. It forces a page break before the question.
Available options
- On
- Off (default)
Choice header (choice_header)
Description
Type in the box the new name of the choice list header.
Valid values
- If left empty, the header will be "Your choices" (default value)
- Any characters
Rank header (rank_header)
Description
Type in the text box the new name of the ranking list header.
Valid values
- If left empty, the header will be "Your ranking" (default value)
- Any characters
Statistics
Prikaži v javni statistiki (public_statistics)
Opis
This attribute allows the survey administrator to chose if a particular question results should be displayed to the survey participants after they submitted the survey.
Note: To have the statistics displayed on the last page, do not forget to enable this functionality from the presentation & navigation settings. Otherwise, no statistics link will be displayed at the end of your survey.The default setting for each question is 'Off' (=Do not show the question statistics to the respondents). You have to enable this for every single question if you want to show the survey statistics of that (those) particular question(s) to the survey participants after the survey submission.
Available options
- On
- Off (default)
Display chart (display_chart)
Description
This attribute allows the survey administrator to choose if a chart that contains the question results should be displayed to the survey participants after they filled out the survey.
Note: To have the chart displayed on the last page, you have to enable the following options:
- public statistics survey setting from the presentation & navigation settings
- show graphs survey setting from the presentation & navigation settings
- public statistics question attribute, and
- display chart question attribute.
Available options
- On
- Off (default)
Chart type (chart_type)
Description
This attribute allows the survey administrator to choose which type of chart will be displayed to the respondent once he/she finished filling out the survey.
Note: Do not forget to change the question and survey settings in order to have the charts displayed at the end on the survey. For more details, check the wiki section on the display chart question attribute.Available options
- Bar chart
- Pie chart
- Radar
- Line
- PolarArea
- Doughnut