Actions

Difference between revisions of "Question type - Multiple short text/sl"

From LimeSurvey Manual

(Created page with "{{QS:suffix/sl}}")
(Created page with "{{QS:Random_order/sl}}")
Line 29: Line 29:
 
{{QS:suffix/sl}}
 
{{QS:suffix/sl}}
  
{{QS:Random_order}}
+
{{QS:Random_order/sl}}
  
 
{{QS:display_rows}}
 
{{QS:display_rows}}

Revision as of 20:51, 5 September 2013

Other languages:
English • ‎Nederlands • ‎español • ‎français • ‎slovenščina • ‎日本語

Kratek opis

Ta tip vprašanja dovoljuje kratke odgovore znotraj večih vnosnih polj. Uporabnik najprej definira vprašanja nato pa doda imena polj z odgovori.
Q MST.jpg


Glavne nastavitve

Other languages:
English • ‎Nederlands • ‎español • ‎français • ‎slovenščina • ‎日本語
<onlyinclude>

Obvezno (obvezno)

Opis

S pomočjo te nastavitve lahko določite ali mora anketiranec odgovoriti na vsa vprašanja ankete. Če ustvarite vprašanje z več podvprašanji, lahko z nastavitvijo min_answers določite, da bo anketiranec odgovoril le na določene dele ankete in ne vse.


Help.pngIf you use any of the preinstalled themes and the mandatory question attribute is enabled, a red asterisk will be shown next to the question. If you wish to hide it, please check these instructions.


Veljavne vrednosti

  • Da
  • Ne (privzeto)

Te glavne nastavitve so omogočene v verziji 1.92 in dalje

QS:Defaults/sl

QS:Preg validation/sl


Enačba relevantnosti

Opis

Vsako vprašanje vam omogoča določiti enačbo relevantnosti, ki je naslednik pogoja. Z enačbo relevantnosti lahko ustvarite veliko bolj zapleteno pogojno logiko.

Označevanje sintakse

Kadarkoli boste shranili enačbo relevantnosti, bo ovrednotena, pregledana bo tudi sintaksa enačbe. Morebitne napake bodo barvno označene, tako da jih boste lahko hitro odkrili in popravili.

Notice.png
 Hint: To check if all the relevance equations are used correctly within your survey, read about our show logic file feature.


Veljavne vrednosti

Vsaka enačba, ki uporablja sintakso Urejevalnika izrazov, brez zavitih oklepajev.

Primeri

Uporabni primeri: Označevanje sintakse.


Napredne nastavitve

QS:Prefix/sl

QS:Suffix/sl

Other languages:
English • ‎Nederlands • ‎español • ‎français • ‎slovenščina • ‎日本語

<onlyinclude>

Naključni vrstni red odgovorov (random_order)

Opis

V tem primeru sistem LimeSurvey ne upošteva vrstnega reda odgovorov oziroma podvprašanj. Razvrsti jih povsem naključno. Pri tem načinu se vrstni red odgovorov spremeni vsakič, ko se vprašanje znova prikaže, kar pomeni, če se v anketi anketiranec vrne na prejšnje vprašanje se bo vrstni red zopet spremenil. Naključni vrstni red vprašanj omogoča nepristransko odgovarjanje na vprašanja. Naključnost odgovorov na vprašanje omogočite pri nastavitvah posameznih vprašanj.

Možnosti

  • Vklopljeno
  • Izklopljeno (privzeto)

Example

See this example (outside link) to better understand how to use different LimeSurvey randomization features.


Display rows (display_rows)

Description

It sets the number of rows that are displayed without making use of the scroll bar to check all the content. If there are more rows than the number mentioned in this field, then a scroll bar will be displayed. The default value for the "Long free text" question type is 5, while for the "Huge free text question type" is 30.

Valid values

  • Any positive integer number greater than 0



Input box width (text_input_width)

Description

This attribute sets the width of the text input boxes (of the "wrapper" of the text input boxes). The input box is used to introduce an answer to the (sub)question. If the value of the width is sufficiently high, then the text input box will be displayed on the next line. Please note that this option does not set the size of the input or the width of the entire column!

Available options

  • Default: If selected, a default value will be allocated to this attribute in such a way to have both the label and its corresponding text input box on the same line. For example, if the text input box width is 41%, the value of the width of the text input box will be a value that allows both the label and the input box on the same line (58% in this case). If the width of text input box was higher than 58%, then the text input box would be displayed on the next line.
  • 8%; 17%...92%, 100%: the bigger the selected value, the larger the width of the text input box.

Example

  • If you wish to have the input part displayed below the subquestion/label, select the 100% option from the dropdown list.


Always hide this question (hidden)

Description

If enabled, the question will always be hidden - it will not be displayed to the survey participants. This function can be used in the following scenarios:

  • If you wish to prefill a question with a URL and you want not to have it displayed on the screen. This overrides any conditions used within the survey because the respective question will not even be embedded on the page.
  • If you wish to store or calculate a value on the fly via the ExpressionScript - Presentation.
Help.png Note: A common question type that is used with this function is the Equation one.

Available options

  • On
  • Off (default)



Maximum characters (maximum_chars)

Description

This allows you to set the maximum number of characters that can be entered for a text based question. Entering a value of, say, 20 will mean that the participant cannot enter any more than 20 characters.

Valid values

  • Any integer value above 0



Randomization group name (random_group)

Description

It places the questions into a specified randomization group, all questions included in the specified group being displayed in a random order to the survey respondents.

You can find a sample survey using randomization group name in ExpressionScript sample survey.

Valid values

Just enter any string you like (for example: 'group1'). All question which have set the same string within the randomization group name box will have their place in the survey randomized (=randomly exchanged among each other).


Preview To preview the questions use the preview survey instead of the preview question group function, as the second has been reported to not show the questions in a randomized order.


Numbers only (numbers_only)

Description

If you enable this option, the participant can only enter numbers in the text box(es).

For the equation question types, this setting indicates that the result could only be a number, not a string. This will guarantee proper calculations/conversions in follow-up equations regarding the decimal mark.

Behavior by question type

  1. Default: If the subject enters a value that is not a number, that value is immediately cleared from the text box so that the subject can enter an appropriate value.
  2. Array (Texts): If the numbers only option is disabled, the "Show totals for" and "Show grand total" options will be overruled, while the total text boxes will not be displayed.
  3. Equation: Enabling this option will force the equation results to be converted to a numeric value. If the equation result is not a number (and not blank), the equation will return NaN, being saved as an empty string in the response table.

Available options

  • On
  • Off (default)


Insert page break in printable view (page_break)

Description

This attribute is only active when you actually print a survey from the Printable View. It forces a page break before the question.

Available options

  • On
  • Off (default)


These Advanced Settings are available in Version 1.92 and beyond

Array filter (array_filter)

Description

The Array filter setting allows you to use any multiple choice question to select or set which responses are displayed in a subsequent list, array or multiple choice question.

The subsequent questions can be filtered on any array question type, including:
  • Multiple choice
  • Multiple choice with comments
  • Multiple short text
  • Multiple numeric
  • Array (5 point, 10 point, Yes/No/Unknown, Increase/Same/Decrease, Column)
  • Array (Dual Scale, Text, Numbers)
  • Ranking

Furthermore, each of these question types can be filtered.

The only exception is Array (Column), which can filter other questions, but not itself.

How to set a filter

To set a filter, enter the question code of a multiple options question in the array filter box of the question you are currently editing. The respective question will be used as the source of information for the current question, the selected answers from the previous question being retrieved and used as answer options for the current question. For example, if your source multiple option question code is "Q1", enter "Q1" into the 'Array Filter' box to start the filtering process of the answers. Only the answer options that are selected in question Q1 will be visible in the array_filter-ed question.

If you wish more questions to be filtered via this option, type the question codes in the box separated by semicolons (;).
Important.png  The subquestion codes used in the first question must coincide with the subquestion codes from the second one. Otherwise, the array filter function will not filter the answers to the first question. Check the below example to better understand how the whole system works.


Cascading

The selected options can be displayed in cascade. This means that you can select a question which filters another question, which filters another question, and so on.

Array filter example

Let's take a look at the following example to better understand the power of this setting:


Array filter with multipe short text.jpg


In the screenshot from above, we got two questions. The first one is a multiple short text question type, while the second one is an array dual scale question type. The answers you provide in the first question will be listed in the second one. Technically, the answers you provide to the subquestions from the first question are filtered and displayed in the second question.

This example can be downloaded from the following link: limesurvey_group_32.lsg. Import this question group into your LimeSurvey installation.



Array exclusion filter (array_filter_exclude)

Description

The Array filter exclusion setting allows you to use any multiple choice question to select or set which responses are NOT displayed in a subsequent list, array or multiple choice question.

The subsequent questions can be filtered on any array question type, including:
  • Multiple choice
  • Multiple choice with comments
  • Multiple short text
  • Multiple numeric
  • Array (5 point, 10 point, Yes/No/Unknown, Increase/Same/Decrease, By column)
  • Array (Dual Scale, Text, Numbers)
  • Ranking

Furthermore, each of these types of questions can filtered.

The only exception is Array by column which can filter other questions, but it cannot be filtered.

How to set it up

Enter the question code of a multiple options question in the array exclusion filter box of the question you are currently editing. The respective question will be used as the source of information for the current question, the non-selected answers from the previous question being retrieved and used as answer options for the current question. For example, if your source multiple option question code is "Q1", enter "Q1" into the 'Array exclusion filter' box to start the filtering process of the answers. Only the answer options that are NOT selected in question Q1 will be visible in your question.

If you wish more questions to be filtered via this option, type the question codes in the box separated by semicolons (;).
Important.png  The subquestion codes used in the first question must coincide with the subquestion codes from the second one. Otherwise, the array exclusion filter function will not filter the answers to the first question. Check the below example to better understand how the whole system works.


Cascading

The selected options can be displayed in cascade. This means that you can select a question which filters another question, which filters another question, and so on.

Example

Let's see together the below example:


Example array filter exclude.png


In the screenshot from above, we got two questions. The first one is a multiple choice question type, while the second one is a multiple choice with comments question type. The answers you provide in the first question will be excluded from the second one. For example, if you select the ComfortUpdate option (that has the subquestion code 'SQ1') and the Plugin option ('SQ4'), the 'SQ1' and the 'SQ4' subquestion correspondents from the second question will be excluded. In our screenshot, we can observe that only the unselected options in the first question and displayed in the second one.

This example can be downloaded from the following link: Limesurvey_group_array_filter_exclude.zip. Import this question group into your LimeSurvey installation.



Array filter style (array_filter_style)

Description

This function allows you to choose how the array filtered subquestions are displayed. They can either be "hidden" or "disabled".

Help.png To learn how to filter subquestions, please read the following wiki section.

Available options

  • Hidden (default) - if this option is selected, then the previously selected subquestions will not be displayed in the second question.
  • Disabled - if this option is selected, then the previously selected subquestions will be greyed out and become unselectable.

Example

If you wish to use the "disabled" option, then the previously selected subquestions will be displayed like this:

Array filter style disabled.png



Minimum answers (min_answers)

Description

This function can be used to ensure that a user selects at least a certain number of answers in a multiple choice question.

Valid values

  • Any integer value above 0
  • Any number
  • Any SGQA code
  • Any question code (variable name)
  • Any equation, using ExpressionScript syntax, without surrounding curly braces.

Example

If set to X (a random number), the users can submit the survey form if they select at least X checkboxes. If this option is utilised for ranking questions, this ensures that at least three items are ranked before allowing the respondent to submit the answers/survey.

Help.png Please note that if you use this attribute with Ranking questions, you have to set the question to non-mandatory. Otherwise, all the items need to be ranked which is counter-intuitive if you decide to use the min_answers function too.



Maximum answers (max_answers)

Description

It can be used to limit the total number of answers a user can select in a multiple choice question.

Valid values

  • Any number value
  • Any SGQA code
  • Any question code (variable name)
  • Any equation, using ExpressionScript syntax, without surrounding curly braces.

Example

If set to 2, the user will only be able to check at most two checkboxes or one checkbox + fill the "Other" field (if any). For the Ranking question type, the participant would be able to select maximum two items.



Question validation equation (em_validation_q)

Description

This is an equation that is used to validate the entire question (e.g, all of its parts collectively for a multi-answer question). If the question fails the validation criteria, then em_validation_q_tip message will be displayed (it uses the CSS style .error). This tip uses the .em_q_fn_validation CSS style, which is hidden by default within template.css.

The main difference between this feature and the subquestion validation equations (em_validation_sq option) is that for this feature, if the question (or question parts) fail validation, then an error message could be shown. For the subquestion validation, each text entry cell (e.g., in an array question type, but it can also be applied to single entry question types) will be styled so that the background color is (light) red.

Valid values

  • Any equation that makes use of the ExpressionScript syntax, without surrounding curly braces.

Example

  • You want to collect demographic information from users via a multiple short text question, and you want to validate that the user has entered a valid email address and phone number.

This example shows how the question looks with invalid answers:

Validation-invalid-both.jpg

And here is what it looks like with one invalid answer:

Validation-invalid-phone.jpg

Here is how you edit a question to enter that information:

Validation-gui.jpg

And here is part of the Show Logic File output that lets you check the accuracy of your expression and ensure that there are no syntax errors:

Validation-logic.jpg

As you can see, the validation equation tests that both the email and phone number are either empty or match a regular expression filter.

The validation tip only shows the warning message if the phone or email appears invalid.

Notice.png
 Hint: In order to create complex validation messages, read about the usage of the ExpressionScript.


If you wish to import the example from above into your LimeSurvey installation, download the following .lsq file: Em_validation_q_example.zip.

Notice.png
 Hint: Remember, LimeSuvey uses the Perl syntax for regular expressions, so they should start and end with / (slash character)!



Tip for whole question validation equation (em_validation_q_tip)

Description

If you are using the question validation equation, you can use this box in order to display an optional message as question tip on how the question has to be filled out.

Valid values

Example

See the example from the question validation equation wiki section- it shows how the tip can be tailored to show which parts of a multiple short text question fail the validation criteria.



Sub-question validation equation (em_validation_sq)

Description

This is an equation that is used to validate each subquestion (text field) individually. Any text field that does not pass these validation conditions will have its background color turned pink (using the .em_sq_fn_validation CSS style) to highlight the error. Note that this is available in addition to the regular expression-based validation option.

Valid values

Any equation that makes use of the ExpressionScript syntax, without surrounding curly braces.

Examples

For example, if you want to allow only numbers that are a multiple of 3 as answers, the equation would be:

(this / 3) == floor(this/3)

The reserved variable this is automatically replaced by a reference to the active text entry cell.



Tip for sub-question validation equation (em_validation_sq_tip)

Description

If you are using em_validation_sq, this is an optional message/tip that will be displayed if the introduced answer is incorrect.

Valid values

  • Any string

Example

  • Continuing the example of validating emails, the tip might be "Please enter valid email addresses."