Tip vprašanja - Večkratno kratko besedilo

From LimeSurvey Manual

This page is a translated version of the page Question type - Multiple short text and the translation is 53% complete.

Outdated translations are marked like this.
Other languages:
English • ‎español • ‎français • ‎日本語 • ‎Nederlands • ‎slovenščina

Kratek opis

This question type is a variation on the "Short Text" question type which allows more than one text entry per question. The user first defines the question and can then add additional text boxes by adding 'Answers'. Each answer becomes the label of the new text box.

Q MST.jpg


General options

Other languages:
English • ‎español • ‎français • ‎日本語 • ‎Nederlands • ‎slovenščina

Obvezno (obvezno)


S pomočjo te nastavitve lahko določite ali mora anketiranec odgovoriti na vsa vprašanja ankete. Če ustvarite vprašanje z več podvprašanji, lahko z nastavitvijo min_answers določite, da bo anketiranec odgovoril le na določene dele ankete in ne vse.

Help.pngIf you use any of the preinstalled themes and the mandatory question attribute is enabled, a red asterisk will be shown next to the question. If you wish to hide it, please check these instructions.

Veljavne vrednosti

  • Da
  • Ne (privzeto)

Relevance equation


If the value of the relevance equation is "1" or "true", the question is "relevant" in the survey context, i.e. it is shown to the survey participant. If not, the question is hidden. Any survey question allows you to specify a relevance equation. This function is the successor of conditions and supports much more complex conditional logic.

Označevanje sintakse

Whenever you save the relevance equation, it is evaluated and syntax-highlighted. Any errors will be color coded so that you can quickly detect and fix them.

Hint: To check if all the relevance equations are used correctly within your survey, read about our show logic file feature.

Veljavne vrednosti

  • Any equation that makes use of the Expression Manager syntax, without surrounding curly braces.


Here are good examples of syntax highlighting.

QS:Preg validation/sl




QS:Text input width/sl

Label column width (label_column_width)


The label column width option allows you to set the width of the label/subquestion (of the wrapper of each label). Please note that this option does not set the width of the column where the labels are located.

Available options

  • Default: If selected, a default value will be allocated to have both the label and its corresponding text input box on the same line. For example, if the text input box width is 92% and the label column width is set to default, the label and its corresponding answer text box will be displayed on the same row. If the width of the label "wrapper" was higher than 7%, then the text input box would be displayed on the next line.
  • Hidden: If chosen, the first column (that contains subquestions) will not be displayed to the survey respondent.
  • 8%; 17% ... 92%; 100%: the bigger the selected value, the larger the width of the subquestion.

Example: If you wish to have each subquestion displayed on its own row, increase the width to 100%, the text input box being then displayed under each subquestion.

Question theme (question_theme)


It allows you to use customized themes for the respective question.

Available options

  • Your created question themes which are located under the Question themes in the Themes panel.
Help.png Note: This feature is under development at the moment.

Hide tip (hide_tip)


Most questions will usually include a tip that says "Please choose one of the following options" or a hint text on how to fill out the question. This attribute allows you to turn off or on this tips/hints.

These tips/hints include validation criteria messages (such as min/max number of answers, min/max/equals sum value). If hide_tip is enabled, these messages will be hidden. However, if the user enters invalid data, the tips will appear. They will be coloured in red, getting changed to green once the validation criteria are met.

Available options

  • On - the tips/hints are hidden;
  • Off (default).

QS:Display rows/sl

Other languages:
English • ‎español • ‎français • ‎日本語 • ‎Nederlands • ‎slovenščina


Naključni vrstni red odgovorov (random_order)


V tem primeru sistem LimeSurvey ne upošteva vrstnega reda odgovorov oziroma podvprašanj. Razvrsti jih povsem naključno. Pri tem načinu se vrstni red odgovorov spremeni vsakič, ko se vprašanje znova prikaže, kar pomeni, če se v anketi anketiranec vrne na prejšnje vprašanje se bo vrstni red zopet spremenil. Naključni vrstni red vprašanj omogoča nepristransko odgovarjanje na vprašanja. Naključnost odgovorov na vprašanje omogočite pri nastavitvah posameznih vprašanj.


  • Vklopljeno
  • Izklopljeno (privzeto)


See this example (outside link) to better understand how to use different LimeSurvey randomization features.

Text input box size (input_box_size)

Hint: This features is available starting in version 3.0.0


This function allows you to set the size of the text area (the text input box). By default, LimeSurvey forces the input box to be displayed with a default size. This can be overridden by making use of this function.

Help.png To move the box on the next line, you need to increase the size of the wrapper. To do so, increase the value of the text input width attribute.

Valid values

  • Any numeric value

Always hide this question (hidden)


If enabled, the question will always be hidden - it will not be displayed to the survey participants. This function can be used in the following scenarios:

  • If you wish to prefill a question with a URL and you want not to have it displayed on the screen. This overrides any conditions used within the survey because the respective question will not even be embedded on the page.
  • If you wish to store or calculate a value on the fly via the Expression Manager.
Help.png Note: A common question type that is used with this function is the Equation one.

Available options

  • On
  • Off (default)

CSS class (css_class)


If you want to add special CSS classes to certain questions, you can enter the CSS class name(s) in this box. Make sure you leave an empty space between different class names.

Valid values

  • Any text string with a space between different CSS class names.
Hint: You can also insert an expression in this box (New in 3.0.0 ). Remember that the output of the expression will not be updated dynamically.

According to the W3C, CSS class names can contain only the characters [a-zA-Z, and 0-9] and ISO 10646 characters U+00A1 and higher, plus the hyphen (-) and the underscore (_). They cannot start with a digit, or a hyphen followed by a digit. LimeSurvey encodes CSS classes, but it does not fix it totally.


QS:Maximum chars/sl


QS:Min answers/sl

QS:Max answers/sl

QS:Array filter exclude/sl

QS:Array filter style/sl

Filter polja (array_filter)


The Array filter setting allows you to use any multiple choice question to select or set which responses are displayed in a subsequent list, array or multiple choice question.

The subsequent questions can be filtered on any array question type, including:
  • Multiple choice
  • Multiple choice with comments
  • Multiple short text
  • Multiple numeric
  • Array (5 point, 10 point, Yes/No/Unknown, Increase/Same/Decrease, Column)
  • Array (Dual Scale, Text, Numbers)
  • Ranking

Furthermore, each of these question types can be filtered.

The only exception is Array (Column), which can filter other questions, but not itself.

How to set a filter

To set a filter, enter the question code of a multiple options question in the array filter box of the question you are currently editing. The respective question will be used as the source of information for the current question, the selected answers from the previous question being retrieved and used as answer options for the current question. For example, if your source multiple option question code is "Q1", enter "Q1" into the 'Array Filter' box to start the filtering process of the answers. Only the answer options that are selected in question Q1 will be visible in the array_filter-ed question.

If you wish more questions to be filtered via this option, type the question codes in the box separated by semicolons (;).
The subquestion codes used in the first question must coincide with the subquestion codes from the second one. Otherwise, the array filter function will not filter the answers to the first question. Check the below example to better understand how the whole system works.


The selected options can be displayed in cascade. This means that you can select a question which filters another question, which filters another question, and so on.

Array filter example

Let's take a look at the following example to better understand the power of this setting:

Array filter with multipe short text.jpg

In the screenshot from above, we got two questions. The first one is a multiple short text question type, while the second one is an array dual scale question type. The answers you provide in the first question will be listed in the second one. Technically, the answers you provide to the subquestions from the first question are filtered and displayed in the second question.

This example can be downloaded from the following link: limesurvey_group_32.lsg. Import this question group into your LimeSurvey installation.

Exclusive option (exclusive_option)


The exclusive option attribute takes the code of an answer in a multiple option question so that when clicked on its corresponding checkbox, all the other previously checked options will get unchecked and get marked as read-only (=disabled). This function was created to ensure the data integrity when one of the multiple options in a multiple option question implies that no other option can be selected too. Basically, this feature marks the other attributes as being irrelevant.

It is also possible to have multiple exclusive options. These must be separated by semicolons.


For a short explanation on answer codes, check first the following wiki section. Once understood, introduce the "AnswerCode" that will trigger the function once selected.

Below, you may see an example where the exclusive option attribute is used.

You can see in the first screenshot that some non-LimeSurvey options are selected:

Part 1 example exclusive option.png

If you click on the marked option (which is entered in the exclusive option box), the other options will get unmarked and disabled, being left only with the current option checked:

Part 2 example exclusive option.png

To take a closer look at our example, import the .lsq file into your LimeSurvey installation:

File:Example exclusive option

Ime naključne skupine (random_group)


Vprašanje doda v skupino, kjer se vsa vprašanja prikažejo po naključnem vrstnem redu.

You can find a sample survey using randomization group name in Expression Manager sample survey.

Veljavne vrednosti

Vnesite poljuben želen niz (na primer: 'skupina1'). Vprašanja, ki vsebujejo ta niz, bodo vključena v anketo z naključnim prikazom (=vprašanja se naključno izmenjujejo med seboj).

Question validation equation (em_validation_q)


This is an equation that is used to validate the entire question (e.g, all of its parts collectively for a multi-answer question). If the question fails the validation criteria, then em_validation_q_tip message will be displayed (it uses the CSS style .error). This tip uses the .em_q_fn_validation CSS style, which is hidden by default within template.css.

The main difference between this feature and the subquestion validation equations (em_validation_sq option) is that for this feature, if the question (or question parts) fail validation, then an error message could be shown. For the subquestion validation, each text entry cell (e.g., in an array question type, but it can also be applied to single entry question types) will be styled so that the background color is (light) red.

Veljavne vrednosti

  • Any equation that makes use of the Expression Manager syntax, without surrounding curly braces.


  • You want to collect demographic information from users via a multiple short text question, and you want to validate that the user has entered a valid email address and phone number.

This example shows how the question looks with invalid answers:


And here is what it looks like with one invalid answer:


Here is how you edit a question to enter that information:


And here is part of the Show Logic File output that lets you check the accuracy of your expression and ensure that there are no syntax errors:


As you can see, the validation equation tests that both the email and phone number are either empty or match a regular expression filter.

The validation tip only shows the warning message if the phone or email appears invalid.

Hint: In order to create complex validation messages, read about the usage of the Expression Manager.

If you wish to import the example from above into your LimeSurvey installation, download the following .lsq file:

Hint: Remember, LimeSuvey uses the Perl syntax for regular expressions, so they should start and end with / (slash character)!

QS:Em validation q tip/sl

QS:Em validation sq/sl

QS:Em validation sq tip/sl


QS:Numbers only/sl

Insert page break in printable view (page_break)


This attribute is only active when you actually print a survey from the Printable View. It forces a page break before the question.

Available options

  • On
  • Off (default)


Display chart (display_chart)


This attribute allows the survey administrator to choose if a chart that contains the question results should be displayed to the survey participants after they filled out the survey.

Help.png Note: To have the chart displayed on the last page, you have to enable the following options:

Available options

  • On
  • Off (default)

Chart type (chart_type)


This attribute allows the survey administrator to choose which type of chart will be displayed to the respondent once he/she finished filling out the survey.

Help.png Note: Do not forget to change the question and survey settings in order to have the charts displayed at the end on the survey. For more details, check the wiki section on the display chart question attribute.

Available options

  • Bar chart
  • Pie chart
  • Radar
  • Line
  • PolarArea
  • Doughnut