Survey settings/ja

Overview

新しいアンケートを作成するには、管理ボタンバーの右側にある「追加」ボタンを押します。

この操作で「アンケートの新規作成」画面が表示されます。以下、各項目について解説します：

1. 題名: アンケートのタイトルを記します。（例：「企業取引に関する調査2003」「アイスクリームについて」）。ここで記入した題名は、公開されるアンケートのすべてのページに表示されます。
2. 摘要: アンケートの詳細について記します（例：「企業取引の新時代についてどう考えるかを問う調査」「チョコレートアイスの人気っぷりを知るための調査」）。htmlタグを用いることができます。
3. ようこそ文: アンケートの回答者がログインしたときに最初に表示される文章を記します。（例：「この度はアンケートに御協力いただきありがとうございます。」）htmlタグを用いることができます。
4. 管理者: アンケートの管理者名を記します。ここで記入した管理者名は、回答者に送付されるすべてのメールに記載されます。
5. 管理者 E-mail: アンケートの管理者のメールアドレスを記入します。ここで記入したアドレスは、回答者に送付されるすべてのメールの返信先として用いられます。
6. Fax番号: ここで記入したFAX番号は、「印刷用のアンケート」に記載されます。オンラインのアンケートを利用できない回答者に、紙で印刷したものを送付するときに便利です。
7. フォーマット: アンケートの回答画面の表示方法です。「質問ごと」「グループごと」「一括」の中から選択します。
   1. 質問ごと: １質問１ページで表示します。
   2. グループごと: １質問グループ１ページで表示します。「ようこそ画面」「投稿画面」はこれらとは別に１ページで表示されます。
   3. 一括: すべての質問を１ページで表示します。「ようこそ画面」「投稿画面」ではなく、「ようこそ文」「投稿依頼文」が質問と同じページに表示されます。
8. テンプレート: 回答画面のテンプレートです。インストールされている中から選択します。デフォルトのテンプレートは、面白みはないかもしれませんが機能的につくってあります。テンプレートを自作したい場合は、 テンプレート の説明を参照してください。
9. クッキーを使用しますか？: クッキーを使用する場合、回答者のアクセス管理はクッキーを用いて行われ、トークンテーブルは利用しません。クッキーは回答者各人のコンピュータに保存されます。クッキーを利用すると、同じ人が複数回アンケートに回答するのを防ぐことができます。この方法にはセキュリティ強度の点で内在的な限界がありますが、たいていの状況では複数回の回答を阻むことができます。
10. 保存を許可しますか？: 「はい」を選択すると、回答者が回答途中で未投稿のアンケートを保存して、後で再開することができるようになります。
11. [<<前へ] ボタンを表示: デフォルトでは「はい」が選択されます。「いいえ」を選択すると、アンケートを完了するまで回答者は前のページに戻ることができなくなります。
12. 管理者通知: 回答者がアンケートを完了して投稿した際に、管理者にメールで通知するかどうかを、以下から選択します：
    1. 通知なし - 通知しません。
    2. 通知あり（簡易） - 回答があったということだけ管理者にメールで通知します。
    3. 通知あり（詳細：結果つき） - 回答結果を管理者にメールで通知します。
13. 匿名にしますか？: デフォルトでは「はい」が選択されます。「いいえ」を選択すると、アンケートの回答をトークンテーブルのデータと突き合わせることができるようになります（追跡可能）。この場合はトークンテーブルを作成する必要があります。（訳注：アンケートを追跡可能にする方法についてはトークンも御参照ください。）
14. 案内メール題名: トークンを利用して参加者に案内メールを送る際に用いられる題名です。
15. 案内メール本文: トークンを利用して参加者に案内メールを送る際に用いられる本文です。状況に応じて自由に変更することができます。デフォルトで表示される文面は言語ファイルで設定されています。トークンを利用しない場合には、メールは送信されないのでここに何が記入してあろうと影響はありません。メール本文では、各人によって異なる情報を入力するために以下のタグを用いることができます：
    1. {FIRSTNAME} - 名。トークンテーブルの "firstname" の値と置き換えられます。
    2. {LASTNAME} - 姓。トークンテーブルの "lastname" の値と置き換えられます。
    3. {SURVEYNAME} - アンケート題名。アンケートの題名と置き換えられます。
    4. {SURVEYDESCRIPTION} - アンケート摘要。アンケートの摘要と置き換えられます。
    5. {ATTRIBUTE_1} - 属性1。トークンテーブルの "attribute 1" の値と置き換えられます。
    6. {ATTRIBUTE_2} - 属性2。トークンテーブルの "attribute 2" の値と置き換えられます。
    7. {SURVEYURL} - アンケートURL。アンケートのURLと置き換えられます。
       これらのタグは以下のメール本文にも有効です。
16. 催促メール題名: トークンを利用して参加者に催促メールを送る際に用いられる題名です。
17. 催促メール本文: トークンを利用して参加者に催促メールを送る際に用いられる本文です。タグ等の詳細は「案内メール本文」と同じです。
18. 確認メール題名: トークンを利用する場合に、回答を完了した回答者に自動的に送付される確認メールで用いられる題名です。
19. 確認メール本文: 確認メールの本文です。
20. 参加登録を許可しますか？: トークンを利用する場合、アンケートに回答できるのは、トークンテーブルにエントリがあり、一意なトークンを持つ人だけです。アンケートでトークンを利用し、かつ、一般参加者の登録も受け付けたい場合にこの設定を用います。「はい」にすると、アンケートのURLをはじめて訪れた人がそこで名前とメールアドレスを登録できるようになります。するとスクリプトによりトークンテーブルにエントリが新しく作成され、その人にアンケートの案内メールが送られます。このスクリプトは１メールアドレスあたり１回しか回答できないようになっています。
21. 参加登録メール題名: サイトで参加登録した一般参加者に送られる登録確認メールの題名です。
22. 参加登録メール本文: サイトで参加登録した一般参加者に送られる登録確認メールの本文です。タグ等の詳細は「案内メール本文」と同じです。
23. トークン属性名: トークンテーブルには2つの予備の属性フィールドがあり、そこにユーザについての追加的な情報を入れることができます。一般参加者の登録を許可する場合、各属性欄には一般の人がよくわかるようにタイトルを付ける必要があります。たとえば「属性1」に回答者の部署名を入れているのであれば、それがわかるようなタイトルをうまくつけてください。
24. 回答に日付をスタンプしますか？: アンケートのすべての回答に日付を記録するかどうかを設定します。「はい」にすると、回答が投稿されたときの日時を記録するフィールドが自動的に設けられます。（configuration設定の $timeadjust を参照してください。）
25. IPアドレスを保存しますか？: アンケートのすべての回答者のIPアドレスを記録するかどうかを設定します。「はい」にすると、各回答者のIPアドレスを記録するフィールドが自動的に設けられます。
26. リンク元URLを保存しますか？: アンケートのすべての回答者のリンク元URLを記録するかどうかを設定します。「はい」にすると、各回答者がどのURLからアンケートのURLにきたかを記録するフィールドが自動的に設けられます。
27. 基本言語: アンケートで基本となる言語を設定します。この設定は後から変更することができません。この基本言語をもとにして他言語への翻訳版をつくれば、多言語でのアンケートが可能になります。アンケートを新規作成するときには、追加言語を設定することはできません。追加言語の設定は、アンケート作成後それを編集する際に可能となります。
28. 追加言語: アンケートの他の言語版を追加・削除します。アンケートの新規作成時以外ならいつでも追加・削除できます。追加言語を削除すると、そのアンケートで当該言語用に作成された質問や回答などがすべて失われますので気をつけてください。
29. 有効期限を設定しますか？: 、 有効期限: 「はい」にするとアンケートの終了期限を設定することができます。アンケートの一般公開を終了する日を有効期限として設定します。（例：12月31日に設定すると、1月1日以降はアンケートに回答できなくなります。）
30. 終了URL: ここで記入したURLは、アンケートの最後に表示されます。たとえばアンケートの回答者に、実施元のページ（その他、どこでも）に来てもらうようにすることができます。URLは" http:// "から書いてください。（例： http://www.limesurvey.org）

URLの中に、{SAVEDID} と {TOKEN} を含めることができます。SAVEDID はこの投稿の保存時に割り振られたID、TOKENは回答者のトークンです。例：

http://www.limesurvey.org/test.php?var1={SAVEDID}&var2;={TOKEN}

1. URL詳細: 上記の終了URLをクリックしたときの行き先についての説明です。
2. アンケート終了時に、URLを自動的にロードしますか？: 「はい」にすると、アンケート終了時に「これで完了です」画面を表示するかわりに、上記URLを自動的にロードします。アンケートの評価を利用する場合は、この機能を用いてはいけません。

以上のかわりに、このページからアンケートのインポートを行うこともできます。

-----

Translated from English version, No.15.

Settings

All survey settings and functions are organized in tabs. The following is a description of each tab and field.

General

1. Base language: This sets the base language for the survey. Once saved, you cannot change it later. The language-set is the base language for possible translations of the survey. That way you can have multilingual surveys. During survey creation you cannot add additional languages. You will be able do that if you edit the survey properties again, later.
2. Title: This is the brief descriptive name of the survey (ie: "Enterprise Bargaining Survey 2003", or "Views on Ice Cream"). This title will be displayed on every page of the public survey.
3. Description: This allows you to enter a description of the survey. (ie: "A survey to collect your ideas on the next round of enterprise bargaining" or "A survey to find out the popularity of chocolate ice cream"). You can incorporate HTML elements such as images or videos in this section using the WYSIWYG editor. By default, description is used on invitation email.
4. Welcome message: This allows you to enter a message that will display when a participant first logs into your survey. (ie: "Thank you for taking the time to participate in this survey..") You can incorporate HTML elements such as images or videos in this section using the WYSIWYG editor.
5. End message: This allows you to enter a message that will display when a participant completes your survey. (ie: "Thank you for completing our survey. We will publish results soon."). You can incorporate HTML elements such as images or videos in this section using the WYSIWYG editor.
6. End URL: This URL will be presented as a link at the end of the survey, and allows you to direct your participants back to your home page (or, in fact, anywhere). The End URL has to be entered with "http://" at the beginning, eg. http://www.limesurvey.org.
   You can use they placeholder {SAVEDID}, {TOKEN}, {SID} and {LANG} in this URL.
   SAVEDID is the id assigned to this particular submission, TOKEN is the token used to participate in the survey, SID is the survey ID and LANG is the language code
   eg. http://www.limesurvey.org/test.php?var1={SAVEDID}&var2;={TOKEN}&var3;={SID}⟨={LANG}
   From version 1.82+ you can use URL fields with this field to pass parameters from the start URL to then end URL.
   You can also use {INSERTANS:SGQA} in this URL (since 1.82+). This allows adding the response to a specific question in the survey to the final url. This can be useful for sending a response to an external script (ie an email address collected during the survey). eg: "http://www.limesurvey.org/test.php?email={INSERTANS:1234X56X7}"
7. URL description: The description for the link using the End URL.
8. Administrator: This is the name of the contact person who administers the survey. It will be included in emails sent out inviting participants to respond.
9. Admin email: This is the email address of the administrator (as above) and is used as the 'reply to:' address on any emails sent. You can also enter several email addresses separated with a semicolon - that way survey administrator notifications are sent to more than one person. (Example: "firstaddress@test.com;secondaddress@test.com")
10. Bounce email: This is the email address where a delivery error notification email should be sent. By default, this is the same as the administrator's email address. If you want to use a custom script to parse delivery error emails, then use a special Bounce Email address here and automatically process emails reaching this address with your script. This script could then update the Email Status field of the token line corresponding to this email address (see tokens).
11. Fax to: This field is used to give a fax number on the "printable survey" - ie: when you want to send someone a hard copy because they cannot use the online survey.

Caution: the HTML WYSIWYG editor doesn't allow you to upload files during the survey creation process. Trying to do so will end up with an error message like: "This file uploader is disabled". If you need to upload pictures or any other ressources, please do so after survey creation, by editing the newly created survey.

Presentation & navigation

1. Format: Choose from "Question by question", "Group by group" or "All in one".

   

   • Question by Question: Public survey will display one question per page.
   • Group by Group: Public survey will display all questions in a group per page. Group at a time surveys still have a separate "welcome" page and "submit" page, like "Question by Question" surveys.
   • All in one: Public survey will display all questions in one single page. Activated All in one surveys do not have a "welcome" page or "submit" page - the welcome message and submit button all appear on the same page.
2. Template: Choose from the installed templates in your system. The default template is rather dull, but functional. More information on creating your own templates is available here.
3. Show welcome screen:  Yes/No. If Yes, then the welcome message defined in Text Elements section will be displayed.    Default is Yes.
4. Navigation delay:  Number of seconds before Previous and Next buttons are enabled.   Default 0 seconds
5. Show [<< Prev] button: This option defaults to yes, however if you set it to "No" then users will not have the option of moving to a previous page while completing the survey.
6. Show question index / allow jumping:  Yes/No. Default No.  When Yes, an index will be displayed on the right side.    Users can jump to any section in the survey. In 2.05 the options have changed to Disabled / Incremental / Full. Disabled and Incremental represent the current No and Yes options. Full always shows all groups / questions, this allows the user to freely navigate through the survey. This might not work for all kinds of conditions.
7. Keyboard-less operation: By activating this setting there will be a virtual keyboard available for certain question types.
8. Show progress bar: Yes/No.  Default Yes.   Allow the administrator to turn off the Progress bar
9. Participants may print answers?: This option defaults to no. When it is set to yes, a participant can print a summary of responses at submit time.
10. Public statistics: Yes/No.   Default No.   If set to "Yes" users who have submitted the survey will be presented a link to statistics of the current survey. The admin can set which questions should be included at these statistics by applying the according question attribute.
11. Show graphs in public statistics: (since 1.80) Determines if public statistics for this survey include graphs or only show a tabular overview. Creating graphs for huge surveys with lots of answers takes some time and server resources so this is the switch to turn them on/off (default setting: off).
12. Automatically load URL when survey complete:  Yes/No.  Default No.   If yes, when the survey is submitted, it will automatically redirect to the End URL. The end URL can be defined in the Text Elements Section. Please note that this only works on an active survey.
13. Show "There are X questions in this survey":  Yes/No.  Default Yes.   If Yes, the message will be displayed on the Welcome Screen.    This option will not affect the print version.
14. Show group name and/or group description:  Will control the display of Group Names and Descriptions.   This option will not affect the print version. Four Options:
    • Show Both - Default
    • Show Group Names Only
    • Show group description Only
    • Hide Both
15. Show question number and/or code:
    • Show Both - Default
    • Show Question Number Only
    • Show Question Code Only
    • Hide Both
16. Show "No answer": Yes/No.  Default Yes.   When Yes, the No Answer will be displayed as the default option for non-mandatory single-select questions. Be aware that if you switch this off, the participant won't be able to unselect a chosen answer option in a non-mandatory question.

Publication & access control

1. List survey publicly: Yes/No.  Default No. When it is set to yes, your survey will be listed in the 'available surveys' portal
2. Start date/time: Set this to some date if you want your survey to start on a certain date. The survey will start on midnight of that day and only then will people be able to answer to it. To disable this just clear the date from the input field.
3. Expiry date/time: Set this to some date if you want your survey to expire on a special date. This is the last date on which the public survey script will let people participate. (Example: If you set it for the 31st of December, then people will no longer be able to use the survey script on the 1st of January). To disable this just clear the date from the input field.
4. Set cookie to prevent repeated participation?: If you set this to 'Yes', and your survey does not use a tokens table to control participant access, then a cookie will be saved to the client computer of each survey participant once they have submitted a survey. This cookie will stop the same user on that computer from accessing the survey more than once. There are inherent limitations in the 'security' strength of such a system, but, in general, it allows you to retain some control over multiple entries on public surveys.
5. Use CAPTCHA for: With this option you can decide when you want a CAPTCHA to be used. Default is to enable CAPTCHA only for the public Registration page, but you can also enable it before accessing the survey, and before Load/Saving partial answers.

Notification & data management

1. Send basic admin notification email to: and Send detailed admin notification email to: These fields allow you to send notifications or survey responses to additional email addresses once the survey is submitted. You can edit the templates for these emails under 'Email templates'. Multiple recipients can be set by seperating the entries with a semicolon (;) - eg "yourname@test.com; myname@test.com;hisname@test.com" OR when using placeholders "yourname@test.com;{INSERTANS:82733X12X73};{TOKEN:EMAIL}". Make sure that at least your administrator email is set properly in the survey settings - otherwise no email will be sent or there will be an 'Invalid address:' message when a participant finishes a survey. Please note that there are three different ways for entering an address:
   1. Enter a specific email address (ie: yourname@test.com)
   2. Enter a SGQA code and the response will be sent to an email address entered as an answer to that particular question (use the format {INSERTANS:9999X88X12}, in the same way you would Re-use information from previous answers)
   3. Enter a Token code (only possible if your survey is not anonymous) and the response will be sent to an email address retrieved from a token field (use the format {TOKEN:EMAIL} or {TOKEN:ATTRIBUTE_1} in the same way you would Re-use Information from the Tokens Table)
   4. As of Version 1.92: Enter a valid expression conforming to Expression Manager syntax.  This lets you use question code instead of SGQA syntax (for easier readability), plus conditional logic (e.g. route the notifications to different people depending upon the data entered into the survey).
2. Date stamp?: This field allows you to determine whether the survey will datestamp all responses. If you choose "Yes", then when a response is submitted, a field will be included in that response indicating the time and date that the response was made. (See configuration settings for $timeadjust setting.)
3. Save IP address?: This field allows you to determine whether the survey will save an IP-address for all responses. If you choose "Yes", then when a response is submitted, a field will be included in that response indicating the ip-address of the participant.
4. Save referrer URL?: This field allows you to determine whether the survey will save the referrer URL for all responses. If you choose "Yes", then when a response is submitted, a field will be included in that response where this URL is saved. A referrer URL is the URL from which the user was led to your survey URL.
5. Enable assessment mode?: With this setting you can enable/disable assessments for this survey.
6. Save timings: If activate then on survey activation a separate table will be created where timings for your questions will be saved, e.g. how long a user stays on one page during taking the survey.
7. Participant may save and resume later?: This setting allows a participant to save his responses and resume to answer the survey at a later time. Please note that this makes most sense with open surveys or surveys with anonymized answer. If you are using tokens and the survey is not anonymous in most cases it is better to activate 'Token-based response persistence' in the token tab.
8. Google Analytics API Key for this survey:  Allows for integration with Google Analytics. The API key can be inserted into templates using {GOOGLE_ANALYTICS_API_KEY}. The full JavaScript that Google Analytics expects (including the key) can be included in templates via {GOOGLE_ANALYTICS_JAVASCRIPT}
9. Google Analytics Style for this Survey:  Choices are:
   1. Do not use Google Analytics - so {GOOGLE_ANALYTICS_JAVASCRIPT} is an empty string
   2. Default Google Analytics - {GOOGLE_ANALYTICS_JAVASCRIPT} uses the standard Google Analytics code, inserting the proper Google Analytics Key
   3. SurveyName-[SID]/GroupName - {GOOGLE_ANALYTICS_JAVASCRIPT} contains customized Google Analytics code to log the URL as {SURVEYNAME}-[{SID}]/{GROUPNAME}.  This can be  helpful if you want to analyze navigation paths through your survey, time spent per page, and drop-off rates per page.

Google API howto:

1. Register/login on Google Analytics (GA): www.google.com/analytics/
2. Create a key (the site should not point to the survey, but to the part before 'index.php?') The key should be UA-xxxxx.
3. Go to your survey's global settings in LimeSurvey.
4. Put the key in appropriate field (Google Analytics API Key). It's probably the best to set GA Style to track all pages as you can have more info.
5. You don't need to do anything in shipped templates, as the {GOOGLE_ANALYTICS_JAVASCRIPT} part is already there.
6. Activate the survey.
7. Do the survey.
8. Go to GA panel mainsite. (select appropriate account in left-hand upper corner if you have more than one). You should see some graphs with the statistics. Beware of the dates in upper right corner.

Tokens

1. Anonymized responses?: This allows you to determine whether responses to your survey are matched up with information from your surveys tokens table, or kept 'anonymous'. The default is 'No'. If you choose 'Yes' then your survey is set to radically anonymize responses - there is really no way to connect answers and participants. Even the admin can't link response data and participant/token data. However you will always be able to specifically view each response entered by your participants in the survey. Thus individual, but anonymous, statistics is still possible to do. Attention:: If this feature is activated the response submission date and the token completed date are always set to 1980-01-01 00:00, no matter of other settings. Why? Invalidating the submission date ensures no match with webserver logs where the token key might show up when a survey is started. Invalidating the token completed date makes sure that you can't align the order of submitted responses to the order of the token date/time.
2. Allow multiple responses or update responses with one token?: Default: No If you activate this setting the participants may return to his survey by clicking the invitation link, even if he already submitted the survey. If survey is anonymous, this add a new responses. If survey is not anonymous, user update existing responses.
3. Enable token-based response persistence: If your survey uses tokens and your responses are not anonymized, then you may want to enable this feature. If you turn this on, then your participants can leave your survey and resume later at any time without using the 'Resume later' function - for example if he/she gets distracted or his browser crashes. Upon clicking the invitation link again he will find his survey answers so far still in place when returns to the survey and will even continue on the last page seen.
4. Allow public registration: If you use tokens to control access to your survey, the only people who can use the survey are those who have an entry and a unique token from the token table. If you would like to use tokens, but also allow public registration, set this to "Yes".  The "Yes" setting will allow a visitor to register his name and email address. The script will create a new entry in your tokens table for this person, then send them an invitation email. The script will ensure that only one person per email address can complete your survey.
5. Use HTML format for token emails?: When set to yes, all emails sent by the token management interface (invite, reminder, confirmation) will be formatted as HTML. You'll then be able to use rich formatting for this emails. Default is Yes at survey creation. Caution, when you switch on/off this feature, you'll have to double check that your email templates are still displayed as you want.
6. Set token length to: Usually you don't need to change this, the default setting of 15 digits (max. supported value: 99) is fine. If changing this setting please enter a number (X) which should be greater than 5 (if the number entered is <5 it will be converted to the default value of 15). When generating tokens all tokens will use a length of X digits.

Import

Alternatively you can import a survey structure from this tab on survey creation. You have the option to let LimeSurvey automatically convert relative URLs to local images/media files and INSERTANS tags (recommended).

Copy

Alternatively you can copy an existing survey from this tab on survey creation. You have the option to let LimeSurvey automatically convert relative URLs to local images/media files and INSERTANS tags (recommended). The other options are pretty self-explaining. Please note that when copying a survey the start date and the end date of a survey cleared.

Panel integration (URL parameters)

Please note that this tab is currently not visible on survey creation but only when you edit the survey settings after saving them for the first time.

On this tab you can set which additional URL parameters will be accepted by your survey. If you like you can also save the value as a response of a "Short text question" or "Multiple short text question" type (you will be able to select any short text question to save it to). Even if you do NOT save the value of the URL parameter you will be able to use this parameter in the end URL. Please have a look at the documentation of the End-URL for further information.

Resources

This tab lets you manage files (pictures, media files) that were uploaded in the HTML Editor and it is only visible if you edit a survey - not during survey creation.

You can:

• Browse available files
• Export files as a ZIP archive
• Import a ZIP archive of files

Important hints:

• Authorized files extensions are defined in config-defaults.php.
• Files for the survey are in the upload/surveys/<sid> subdirectory.
• Uploaded files will only been seen while browsing resources on this survey (groups, questions, answers) not in other surveys or objects (labels).
• Do not expect this limited visibility to ensure confidentiality of the resources as they are reachable with a simple browser to anyone who know the URL to the file.
• You can't import a ZIP file containing subdirectories.

2nd Step - Additional languages

To add more language to a survey you have to create and save it - then edit it again. Now you can add and remove additional languages to the survey. If you remove a language from a survey the complete contents of that language in that survey is deleted permanently so be careful what you are doing.

By clicking on the button 'Save and continue' on the first page in the survey settings you will be taken to the language-specific page which lets you change all texts for each language like Survey name, Welcome Text, etc. You can also edit the date format which should be used for a certain language.