Ejemplos de ExpressionScript
From LimeSurvey Manual
Estructura
La primera parte del artículo describirá para qué se pueden utilizar las expresiones y dónde encontrar/agregar una expresión. La segunda parte proporciona ejemplos sobre cómo utilizar Expression.
Categorías de Expresiones
LimeSurvey utiliza expresiones para los siguientes propósitos:
Relevancia
Propósito: Ocultar grupos de preguntas/preguntas
La relevancia controla si un grupo de preguntas o una pregunta se muestra u oculta. Si el resultado de la expresión es "verdadero" (es decir, 1), se mostrará el elemento. De lo contrario (si el resultado de la Expresión es "falso" (es decir, 0)), el elemento quedará oculto.
Validación
Propósito: Validar aportes/acciones sobre preguntas/subpreguntas/respuestas
La validación controla si la aportación del encuestado a una pregunta o acción es válida o no. Si el resultado de la expresión es "verdadero" (es decir, 1), se aplicará la clase "buena" al elemento y al mensaje de validación. De lo contrario, si el resultado de la expresión es "falso" (es decir, 0)), se aplicará la clase "error" al elemento y al mensaje de validación. Puede declarar un estilo para estas clases en template.css.
Salida de texto
Propósitos: (Hacer algo) y escribir algún texto
Se puede utilizar una expresión para escribir algún texto. Por ejemplo, puede probar o calcular algo y especificar el resultado según el resultado de la prueba o cálculo. También se puede utilizar para insertar el texto de la pregunta, las respuestas, los tipos de preguntas, etc. de una pregunta utilizada antes de utilizar la Expresión. La salida de texto se puede utilizar en todos los lugares donde se muestra un texto y puede devolver todo tipo de resultados.
Caso de uso | Descripción |
---|---|
Micro sastrería | Ajustar un texto, por ejemplo, escribir "Señor" o "Señora" dependiendo de una pregunta de género formulada anteriormente |
Cálculo | Calcule un valor y escríbalo, por ejemplo, "Su ingreso familiar es xxx" |
Referencia | Inserte un texto de un elemento, por ejemplo, "Tu nombre es xxx. ¿Cuántos años tienes?" |
Almacenamiento de respuestas
Propósitos: (Hacer algo) (escribir algún texto) y almacenar algo en la base de datos
El tipo de pregunta de ecuación se puede utilizar para almacenar algo en la base de datos. Puede hacer algo con una Expresión, mostrar la pregunta de Ecuación (que es similar a visualización de texto) y almacenar el resultado de la Expresión en la base de datos. Almacena la respuesta en la tabla de respuestas. Luego, el resultado se puede utilizar dentro de la función de estadísticas o también se puede importar a uno de los formatos proporcionados por la función de exportación de LimeSurvey.
Ejemplos de expresiones
Inserte una respuesta de una pregunta anterior
Usar una pregunta de ecuación oculta para autocompletar una respuesta
Problema: Imagina que tienes dos preguntas Q1 y Q2. La primera pregunta pregunta a los encuestados por su edad. La pregunta 2 divide a los encuestados en tres grupos: la edad es menor de 20 años, la edad es 20 años y la edad es mayor que 20 años. Entonces, la pregunta 2 debe hacer uso de los valores "1", "2", "3", que corresponden a las condiciones anteriores. Además, no debemos olvidarnos de hacer invisible la pregunta Q2 (la pregunta no se mostrará en la encuesta, pero los valores se realizarán a través del "proceso en segundo plano" dentro de la tabla de respuestas).
Para completar la base de datos usando el tipo de pregunta Ecuación:
- Primero, cree una pregunta con el código Q1 como pregunta de entrada numérica.
- Luego cree otra pregunta con el código Q2 como pregunta de ecuación.
- En el capítulo de la pestaña "Configuración de visualización" de la P2:
- establezca el campo "Ocultar siempre esta pregunta" como "Activado"
- escriba en el campo "Ecuación" la expresión:
{si(Q1.NAOK < 20, "1", si(Q1.NAOK > 20, "3", "2"))}
Crear una página de resumen usando marcadores de posición
Este tutorial demuestra cómo puede crear una descripción general al final de la encuesta, enumerando todas las preguntas y respuestas a través de marcadores de posición de ExpressionScript. También muestra cómo limite dicha descripción general a las preguntas respondidas únicamente.
Nuestro ejemplo se puede descargar desde aquí: Ejemplo de encuesta de marcadores de posición de encuesta.
Tipos de preguntas que se utilizan aquí:
1. Preguntas de opción única/preguntas de texto único/numéricas
- Lista (desplegable)
- Lista (radio) [L]
- Sí/No [Y]
- Texto libre largo [T ]
- Texto libre breve [S]
- Entrada numérica [N]
- Ecuación [*]
2. Pregunta con subpreguntas
- Texto breve múltiple [Q]
- Elección múltiple [M]
- Matriz [F]
- Matriz (Sí/No/Incierto) [C]!N !*Matriz (elección de 10 puntos) [B]
3. Preguntas con 2 escalas
- Array dual scale [1]
4. Preguntas con escalas X e Y
- Array (Números) [:]
5. Preguntas de máscara
- Visualización de texto [X]
En este ejemplo simple, nuestra descripción general será una lista simple con:
- Texto de la pregunta: Respuesta del usuario
Preguntas de opción única/texto único/preguntas numéricas
Para todos estos tipos de preguntas, Limesurvey almacenará una única respuesta:
- ¡Lista (desplegable)
- Lista (radio)
- Lista con comentario
- 5 puntos de elección
- Sí/No
- Texto libre corto
- Texto libre largo!N !*Texto libre enorme
- Entrada numérica
- Ecuación
- Fecha
- Sexo
Suponiendo que el código de la pregunta es q1, podemos hacer referencia al texto de la pregunta y responder usando:
- {q1.pregunta}: {q1.mostrado}
Ejemplo:
- ¿Cuántos años tienes?: 25
Si desea comprobar si se respondió esa pregunta, puede incluir una declaración IF alrededor de su salida:
{if(!is_empty(q1),join("- ",q1.question,": ",q1.shown),"")}
Esto se "traduce" a: SI la pregunta con código q1 no está vacía, genera "- " Y el texto de la pregunta Y ": " Y el texto de la respuesta (la función join() une elementos como una nueva cadena; DE LO CONTRARIO: no genera nada (" " significa cadena vacía).
Pregunta con subpreguntas
Para todos estos tipos de preguntas, LimeSurvey utiliza subpreguntas:
- ¡Múltiples textos cortos
- Múltiples opciones
- Múltiples opciones con comentarios
- Matriz
- Matriz (5 puntos a elegir)
- Matriz (10 puntos a elegir)
- Matriz (Sí /No/Incierto)
- Matriz (Aumentar/Igual/Disminuir)
- Matriz por columna
Suponiendo que el código de la pregunta es q2 y las subpreguntas están numeradas SQ001, SQ002 (numeración automática realizada por LimeSurvey), podemos hacer referencia al texto de la pregunta y responder usando:
- {q2_SQ001.question}: {q2_SQ001.mostrado}
- {q2_SQ002.question}: {q2_SQ002.mostrado}
Para preguntas de opción múltiple, ahora tiene sentido mostrar el texto de la subpregunta marcada pero mostrar una Y para cada opción seleccionada:
- {q2_SQ001.question}: {q2_SQ001}
- {q2_SQ002.question}: {q2_SQ002}
...
Tenga en cuenta que actualmente no es posible generar el texto de las preguntas con subpreguntas; consulte esta solicitud de función.
Ejemplo 1 (asumiendo que el tipo de pregunta es de opción múltiple)
- ¿Conoces estas marcas de coches?
--Mercedes: Sí
-- Audi: No
-- Volvo: Sí
If you want to output checked items only you can put an IF statement around your output and check for the checkbox value:
{ if( q2_SQ001=="Y", join( "- ", q2_SQ001.question, ": ", q2_SQ001.shown ), "" ) }
Use the listifop function if you want to output a list of only the selected items, eg: Mercedes, Volvo
{ listifop( 'value', '==', 'Y', 'question', ', ', that.q2.sgqa ) }
Where that.q2 expands to all of q2's subquestions. See self, this and that for more detail.
Example 2 (assuming question type is Array (10 point choice))
- Please rate the quality of the car brands below on a scale from 1=very bad to 10=very good?
-- Mercedes: 7
-- Audi: 9
-- Volvo: 9
If you want to output rated items only you can put an IF statement around your output and check if the current sub question was answered by using:
{ if( ! is_empty( q3_SQ001 ), join( "- ", q3_SQ001.question, ": ", q3_SQ001.shown ), "" ) }
Use the listifop function if for example you want to only output a list of the selected items greater than eight, eg: Audi / Volvo
{ listifop( 'value', '>', 8, 'question', ' / ', that.q3.sgqa ) }
Question with two scales
Let's assume that the following codes are being used:
- Question code: q4
- Subquestion codes: SQ001, SQ002, ...
- Answer codes scale 1: A1, A2, ...
- Answer codes scale 2: B1, B2, ...
Example for referring to the answer of the third subquestion and second scale: q4_SQ003_1 - Question 4, subquestion 3, second scale.
Let's output the results for both scales and the first two subquestions:
- {q4_SQ001_0.question}: {q4_SQ001_0.shown} / {q4_SQ001_1.shown}
- {q4_SQ002_0.question}: {q4_SQ002_0.shown} / {q4_SQ002_1.shown}
To output the subquestion text, you need to add the scale ID to the placeholder (though the texts are the same for both scales). So instead of {q4_SQ001.question} we have to use {q4_SQ001_0.question} or {q4_SQ001_1.question}.
If you want to export/display the results of subquestions with at least one answer only, use this syntax for each subquestion:
{if(count(q4_SQ001_0,q4_SQ001_1)>0,join("- ",q4_SQ001_0.question,": ",q4_SQ001_0.shown," / ",q4_SQ001_1.shown),"")}
Question with X and Y scales
This applies to all matrix questions which allow an answer for every cell (not just every row as shown previously):
- Array Texts
- Array Numbers
Assumed codes used:
- Question code: q5
- Subquestion codes: SQ001, SQ002, ...
- Answer codes: A1, A2, ...
To refer to the result of a certain subquestion from a certain column, you need to use QuestionCode . '_' . SubQuestionCode . '_' . AnswerCode. Example for referring to the answer of the third subquestion and second column: q5_SQ003_A2.
Let's output the results for columns 1-3 of the first two subquestions:
- {q5_SQ001_A1.question}: {q5_SQ001_A1.shown} | {q5_SQ001_A2.shown} | {q5_SQ001_A3.shown}
- {q5_SQ002_A1.question}: {q5_SQ002_A1.shown} | {q5_SQ002_A2.shown} | {q5_SQ002_A3.shown}
Since for these question types each cell (combination of X axes and Y axes) equals one answer option, a test for existing data needs to be done for each cell. Example:
{if(!is_empty(q5_SQ001_A1),join("- ",q5_SQ001_A1.question,": ",q5_SQ001_A1.shown),"")}
Hide question if answer from previous question is empty
Purpose | Hide question if answer from previous question is empty |
Type | Question Relevance |
Example | Question one: question code "name", question text "What's your name?" Question two: question text "{name}, how old are you?" To do: Hide question two if the textfield of question one is empty |
Expression | !is_empty(name) |
Description | is_empty() determines whether a variable is considered to be empty. The "!" negates the result. So if the variable is not empty the Expression will be true and the question is shown |
Steps | Create/edit question two Insert "!is_empty(name)" into "Relevance equation:" |
Sample File | Hide_question_if_empty_question_group.zip |
Hide question group if answer from previous question is Yes or No
Purpose | Hide question group if answer from previous question is Yes or No |
Type | Question group Relevance |
Example | Page one, Question Group one, Question one: question code "PET", question text "Do you have a pet?" -Yes -No Page two, Question Group two: Title "About your pet(s)" To do: Show/Hide question group two if answer from question one is Yes/No |
Expression | PET == "Y" |
Description | PET is the question code for the question you want to check the answer. If you don't use a suffix EM will use "Qcode.code". So you compare the answer code from the PET question to the value "Y". If the participant answers "Yes" the Expression is true and the question group "About your pet(s)" will be shown. |
Steps | Create/edit question group two Insert "PET == "Y"" into "Relevance equation:" |
Sample File | Hide_question group_if_answer_from_previous_question_is_Yes_or_No.zip |
Display value of a multiple answer input question field
Purpose | Display value of a multiple answer input question field |
Type | Reference |
Example | Question one: question code "AskChildAge", question text "How old are your children?". Subquestions codes -Child1 -Child2 -Child3 - ChildXXX Question two: question code "ReportChildAge" question text "About your first child: - CHILD1 is AGE1." |
Expression | {AskChildAge_Child1.question}, {AskChildAge_Child1.value} |
Description | You want to use the value of a subquestion in a following question. You can access the subquestion value with this kind of expression: QcodeQuestion_QcodeSubquestion.value |
Steps | Create/edit the second question Insert this text in the description: "About your first child: - {AskChildAge_Child1.question} is {AskChildAge_Child1.value}." |
Sample File | Display_value_of_a_multiple_answer_input_question_field.zip |
Validate number of boxes ticked per row for an "Array (Numbers) Checkbox" question
Purpose | Validate number of boxes ticked per row |
Type | Validation |
Example | Question of type "Array Numbers (Checkbox Layout)" |
Expression | sum(...) |
Description | (sum(Test_A_1, Test_A_2, Test_A_3, Test_A_4, Test_A_5) <= X) determines whether at least X checkboxes in row A are checked. If you want to check all three rows (A, B, C), you can connect the expression using "&&": (sum(Test_A_1, Test_A_2, Test_A_3, Test_A_4, Test_A_5) <= X) && (sum(Test_B_1, Test_B_2, Test_B_3, Test_B_4, Test_B_5) <= X) && (sum(Test_C_1, Test_C_2, Test_C_3, Test_C_4, Test_C_5) <= X) |
Steps | Create/edit question of type "Array Numbers (Checkbox Layout)". Insert the above expression into "Question validation equation" at the advanced question settings (you might have to adjust variable namings!). |
Sample File | Validate number of boxes ticker per row for an Array (Numbers) Checkbox.lss |
Calculate difference between two dates
Purpose | Calculate difference between two dates |
Type | Relevance / Equation question type / Validation |
Example | Question one (date/time, code: DOB): What is your date of birth? Question two (date/time, code: datetoday): What is the date today? Question three (boilerplate): You are XXXX days old. To do: Calculate and display the number of days between the date given in question 1 and the question 2. |
Expression | {(strtotime(datetoday)-strtotime(DOB))/60/60/24} |
Description | strtotime calculates the number of seconds between the 1st of January 1970 and the given date. The above expression calculates the number of seconds between the two given dates. The term "/60/60/24" just calculates the number of days from the number of seconds. Instead of asking for the "datetoday", you can also use strtotime('now') or simply time(), which directly returns the number of seconds from January 1970 until now (i.e. the time the survey was taken). Thus you could quickly figure out the age of a person in years with the equation {(time() - strtotime(DOB)) / 60 / 60 / 24 / 365.25} In any of these cases, it is critical that the date is entered in a proper format, otherwise the strtotime() function will not work right. |
Steps | Create two date questions (for the date of birth and for today's date) and a boilerplate question. In the question text of the boilerplate question insert: "On {datetoday} you were {(strtotime(today)-strtotime(dob))/60/60/24} days days old." Please note: The function strtotime can work with MANY but not all date formats. If you run into problems set your survey's date format to mm/dd/yyyy or yyyy-mm-dd or dd.mm.yyyy" |
Sample File | Date_difference.zip |
Using ExpressionScript for Assessments
Here comes another example on how to use the ExpressionScript with Array type questions and assessments:</ br>
Let's say you have 2 array questions and you want to save the results of the calculation data to your database. It is actually simple, you will need to create and test your arrays and submit a dummy response to see if it works and gives you the results in the completed page.
Implementation details:
- add a question of type equation
- add the following line assuming that Q1 is your array question code while Q2 is the second one:
{sum(Q1_SQ001.value,Q2_SQ001.value)}
Note that SQ001 is the default code for any subquestion. If you change the subquestion code, adjust the equation above accordingly.
Using em_validation_q in array
You can use the question validation equation to control an array with any condition.
Implementation details:
- for the first array : array of single choice
- Question code is ARRAY
- Sub question code are SQ01,SQ02,SQ03 and SQ04
- update the Whole question validation equation and put
!is_empty(ARRAY_SQ01) and !is_empty(ARRAY_SQ03)
- for the second array : array of text
- Question code is ARRAYTEXT
- Sub question at Y axis code are SY01,SY02,SY03, and SY04
- Update the Whole question validation equation and put
count(self.sq_SY01 >= 1) and count(self.sq_SY03 >= 3)